Trafik Jamz

Win a FREE Subwoofer

Trafik Jamz — Sat, 17 Nov 2012 13:29:21 GMT

BUMP! Still time to win this thing!

Help wanted.

Trafik Jamz — Fri, 05 Oct 2012 23:57:56 GMT

Hours are extremely flexible. Give me a call sometime and we can discuss. 701.541.3484 Chuck

Tune

solid8447 — Mon, 25 Jun 2012 05:35:15 GMT

freaking out ha, i was just saying wtf to the post below my first one. Also I did call so I don't think I was being unreasonable or freaking out.

Ignition Bypass for Mini Cooper

Trafik Jamz — Wed, 11 Jan 2012 17:00:29 GMT

Unfortunately, no. The key in a box is the only module I have for them as well.

Precision Turbo PT6262CEA Billet

Trafik Jamz — Thu, 13 Oct 2011 04:08:06 GMT

PTE's PT6262 Turbocharger features the following: • Exclusive CEA (Competition Engineered Aerodynamics) compressor wheel machined from a 2618-aluminum forging • Higher efficiency and faster transient response for maximum power and performance • 62mm inducer compressor wheel • Compressor cover options: "E" compressor cover 3.0" inlet/2.0" outlet "S" compressor cover 4.0" inlet/2.5" outlet "Ported S" compressor cover 4.0" inlet/2.5" outlet • Exclusive CEA (Competition Engineered Aerodynamics) 62mm, 76 trim turbine wheel • Turbine housing options: T3 .63 or .82 A/R with 4 bolt (2.5") discharge T3 .63 A/R with 5 bolt discharge (with or without wastegate hole) T3 .63 or .82 A/R with 3" V-Band discharge V-Band inlet .64 or .82 A/R with V-Band discharge T4 Tangential .58 or .68 A/R with 3 5/8" V-Band discharge T4 Divided .84 A/R with 3 5/8" V-Band discharge Mitsubishi .63 A/R Buick .63 A/R GMC Syclone/Typhoon .85 A/R • Available with either a Hydrodynamic 360° thrust bearing system, or an air-cooled, dual ceramic ball-bearing center housing rotating assembly (CHRA) Precision customers have a history of setting records and getting noticed. They don't sit in the stands watching the action – they're the ones making it happen. Innovation is a collaborative process and we focus our efforts on you. Get involved and be a part of the action today with PTE. [image: 245-2.jpg] Looking for a different PT turbocharger? Call/email for pricing and availability. Get yours today for $850 plus shipping. 701.541.3484 trafikjamz@far.midco.net

Current Product Lineup

Trafik Jamz — Thu, 30 Jun 2011 15:34:04 GMT

2012 Product lineup is as follows: Pioneer Clarion Zapco JBL Atomic RE Audio DB Drive Phoenix Gold

Remote start?

Trafik Jamz — Wed, 24 Nov 2010 14:55:58 GMT

Yes. Call me 701.541.3484

new amp

Trafik Jamz — Mon, 06 Sep 2010 01:30:11 GMT

Holy crap, I haven't been on in ages. Yes I do. LMK if you are still interested.

Audio Wiring and door and back speakers.

Trafik Jamz — Sat, 04 Sep 2010 18:57:31 GMT

the cheapest I have are some no name POS speakers for like $5, the most expensive I have are Dynaudio, Morel and Focal for $6000 a set. So I suppose the mid level (according to that example) would be a set of Rainbow Germaniums for like $2000 a set. Does that fit your budget? yes there was a bit of sarcasm there

Price Please

Raider — Thu, 02 Sep 2010 18:09:56 GMT

Chuck can you price me out a Clarion cd player(nothing fancy) for my pontoon. Thanks Kelly

Comps...

slow90gsx — Sun, 11 Jul 2010 22:45:10 GMT

IDK prolly some 3 ways...Not junk ones.

Atomic Components

bigdogdj — Fri, 02 Jul 2010 08:09:40 GMT

hey chuck i sent you a pm

Zapco Introduces New Studio X Amplifiers

Trafik Jamz — Mon, 14 Jun 2010 23:56:22 GMT

Zapco is proud to introduce the New Studio X amplifiers. With such a high demand for compact chassis designs, Zapco has thrown its hat into the ring.** With the Studio X amplifier line, you have a very compact chassis - but without compromising power or sound quality, with their Class A/B output.** The first two models ( available in June) are the ST2 and ST4. The ST2 is rated at 2x50 at 4 ohms, 2x80 at 2 ohms, and 1x160 at 4 ohms. The ST4 is rated at 4x50 at 4 ohms, 4x80 at 2 ohms, and 2x160 at 4 ohms. The ST2 foot print is a mere 6.75 x 6.25 inches with the ST4 coming in at 8.375 x 6.25 inches. [image: smST2.jpg] [image: ST4.jpg] and for the DIEHARD SQ people out there: Zapco C2k 2.0A Zapco is proud to introduce a new level of performance in car audio power amplifiers. These new amplifiers provide Audiophile-class audio reproduction to the car audio market that rivals and even surpasses many high-end home audio system components. The absence of bells and whistles is readily apparent upon examining the 2.0A series components. Anything that would adversely affect the amplifiers ability to reproduce audio content faithfully has been left out. Stereo/Mono-bridged functions are now jumper selectable. Separate level controls are provided for left and right channels. There is no built in bass boost, x-overs, etc since most high-end installations employ outboard equipment to provide these functions. Circuitry has been redesigned to make the signal paths of the right and left channels symmetrical, mirror images of one another, with precisely matched delay and phase coherence. This has a dramatic effect on the amplifiers's ability to reproduce a "live" sounding stereo sound stage, with pinpoint-precision imaging and detail. It also provides superior drive capability and sonic definition when the amplifier is in mono-bridged mode. A specially designed, discrete J-FET Class A, Fully differential, high definition Symbilink receiver at the input of the amp cancels interference from the car's environment while selectively amplifying the audio signal. Zapco's signature complementary-symmetry dual-differential front en drives rugged, hand matched high slew output transistors, canceling noise and distortion without resorting to ( or needing ) large amounts of corrective negative Feedback. Utilizing Class A design throughout eliminates higher order distortion leaving 2nd and 3rd order harmonic residuals that are to most ears inaudible. A combination high level push pull, and constant current source driven single ended Class A biasing scheme is employed to provide the maximum degree of Class A power output within the constraints of the Car audio environment. When the Maximum class A output is reached, the Amplifier seamless transitions to Class A/B providing power up to the full rated output. A wide bandwidth, fast slew rate, minimal negative feedback design is utilized for superior sound quality. The power amplifiers audio path was designed without resorting to integrated integrated circuitry (typically referred to as IC's or Chips). Hand selected and matched discrete devices are employed throughout. Simple and Spartan design minimizes coloration of the amplifier's reproduction of program material. Capacitors are used only where necessary, utilizing audiophile grade capacitors in the critical areas in the signal path. The 2.0A series amplifiers effortlessly deliver thunderous bass, transparent mids, and crystalline highs. A newly engineered cooling scheme has been employed to remove heat efficiently from the amplifier's heavy-duty heat sink. Special high capacity, low sound level cooling fans are utilized to exhaust air continuously from the chassis, drawing cooling air efficiently through the heat sink directly across the output and power supply devices. This sophisticated arrangement supports the maximum possible Class A power output. The C2k 2.0A represents the next level of audiophile performance that you have some to expect from Zapco Over the years. Our Team of engineers have taken the performance of an Already outstanding amplifier to new heights as evident by the amplifiers performance in the MECA SQ lanes, and causing quite a stir in the Audiophile circles. If you are looking for the next level in performance, the C2k 2.0A is it. Please see below for more specifications. INPUT CIRCUITRY *Class A *Linear Phase *Fully Balanced *Mono Bridged/Stereo ( Jumper Selectable) *Fully Discrete components *No Crossover *No Switches *No Chips (integrated circuits) AMPLIFIER SECTION *Class A push/pull Bias ( over 50 times higher bias than other Zapco Products ) *Additional single-ended Class-A Bias (current source) added to effectively double the class A output *Transitions to Class A/B operation to full rated power *upgraded output transistors increase slew rate and damping factor *Audio Path Capacitors upgraded with Silver Mica and audio grade electrolytic *Fully Discrete components COOLING *Airflow directed to flow across power and output devices for efficient cooling *Larger, quieter fans are used to effectively double airflow, while cutting the sound level by 50% *Constant flow fan control *perforated aluminum inserts allow proper airflow. [image: DSC02250.JPG]

component speakers

Trafik Jamz — Sun, 06 Jun 2010 20:13:47 GMT

Yes, I will look into some options when I get home today. Sorry it took so long to respond, I somehow missed this post.

Amp Help?

theoblivious — Mon, 10 May 2010 20:00:51 GMT

http://www.crutchfield.com/S-lePPiWvmUon/learn/learningcenter/car/subwoofers_wiring.html

Placing atomic order SOON

Trafik Jamz — Thu, 15 Apr 2010 16:39:21 GMT

Ok....I know you all have heard of the following brands: Sundown Audio FI Audio RD Audio RE Audio DC Sound Labs If the names ring a few bells then you KNOW that they are highly regarded names in the sound competition industry for both great sound and the ability to get loud! What you probably DON'T know is that they are ALL built by Atomic Loudspeakers. Or that they are ALL watered down versions of what Atomic sells. At Spring Break Nationals last month a car loaded with 6 Atomic APXX 12's competed against a vehicle with 24 BTL's from Fi......the vehicle with the APXX12's won by over 2 dB! I am placing another order to Atomic next week. In that order I will be getting some of their newest version of their amps....all MADE IN THE USA! No more chinese/korean sweatshop stuff! Product made for americans, by americans! Loud! Clean! Powerful! What more could you ask for? email sales@trafikjamz.com with any questions or check out their website www.atomicspeakers.com!

Tuning help!!!

2loud — Fri, 09 Apr 2010 14:47:56 GMT

For the record....Chuck did get back to me right away....just sayin

Spring Sale!!!

Trafik Jamz — Fri, 09 Apr 2010 00:27:20 GMT

BIIIIIG discounts from the manufacturer on their D-500.1 500 watt subwoofer amplifier. Normally we sell them for $500. For a limited time I've been authorized to sell them for just $300!! Want a sub & amp package? Great! D-500.1 Amplifier + 2 Energy Series 10" subs in a sealed enclosure for just $425! Want subs, amp & speakers? Add 2 sets of MA-62cx to the order for just $175 more!