<![CDATA[Got some sweet toys for the 240 today]]>First, I finally got a Pignose lip for my car, neds some paint. But I don't care. It will be painted before I mount it on.
legacy image
legacy image

Second, A set of brand new 26x10x15C MT ET DRAG Slicks. I am new to this sort of stuff. But go to learn sometime. Got them for $250 for both.

legacy image
legacy image
legacy image

Next to my 255/40/17
legacy image

To you slick experts. I plan on putting these on a 15x8 weld draglite. Do I need tubes for these. I purchased these from a guy down in the cities and he said you really dont need them, but the jegs catalog says you should have them. He seems to know what he was doing when there was 1 500whp civic and full drag(no motor yet) civic that was just nuts right next to it.

]]>https://fargostreet.com/topic/11727/got-some-sweet-toys-for-the-240-todayRSS for NodeThu, 28 May 2026 00:05:57 GMTTue, 04 Sep 2007 04:13:21 GMT60<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 22:12:31 GMT]]>Lip looks good faber, hope to see her on slicks next year before i leave?

]]>https://fargostreet.com/post/172458https://fargostreet.com/post/172458Tue, 04 Sep 2007 22:12:31 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 18:04:36 GMT]]>

MisterCMK;183044 wrote:
They are a 4x108 for the fox bodies

damn thats out.

]]>https://fargostreet.com/post/172405https://fargostreet.com/post/172405Tue, 04 Sep 2007 18:04:36 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 16:32:52 GMT]]>They are a 4x108 for the fox bodies

]]>https://fargostreet.com/post/172390https://fargostreet.com/post/172390Tue, 04 Sep 2007 16:32:52 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 16:21:39 GMT]]>15x8 5.5 inch backspacing bolt pattern is 4x114.3(aka 4x4.5). in weld draglites or something similar.

are fox body mustangs 4x4.5?

]]>https://fargostreet.com/post/172388https://fargostreet.com/post/172388Tue, 04 Sep 2007 16:21:39 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 16:18:24 GMT]]>What are you looking for sizes?

Check tcstangs or corral.net. TCS might have something local, and corral has a lot of stuff

]]>https://fargostreet.com/post/172386https://fargostreet.com/post/172386Tue, 04 Sep 2007 16:18:24 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 16:03:06 GMT]]>It's a $120 purchase. Consider it a disposable expense for the end of the year.

]]>https://fargostreet.com/post/172385https://fargostreet.com/post/172385Tue, 04 Sep 2007 16:03:06 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 15:57:35 GMT]]>lol. ok cheap drag rims. or the cheapest place to buy welds? dirt track rims are heavy as hell. I want to spend my $$$ once and do it right the first time.

]]>https://fargostreet.com/post/172384https://fargostreet.com/post/172384Tue, 04 Sep 2007 15:57:35 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 15:39:41 GMT]]>Cheap and weld wheels dont usually go together. If you wanted something quick and cheap so you could at least race this year:

http://www.circleracing.com/

]]>https://fargostreet.com/post/172378https://fargostreet.com/post/172378Tue, 04 Sep 2007 15:39:41 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 15:36:26 GMT]]>

wannabe;183024 wrote:
Just go get it tuned and leave it alone...

What you said makes no sense. especially when you quoted something about tires.

]]>https://fargostreet.com/post/172376https://fargostreet.com/post/172376Tue, 04 Sep 2007 15:36:26 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 15:35:07 GMT]]>

Grr;183019 wrote:
you would need tubes in those for sure. some people dont run them, but the general consensus is that its a good idea.
AND, if you didnt know it already, heres a nice little suprise!
http://home.aanet.com.au/nistune/
Gary

On that site they talk about calumsult. That is what I am getting. They are both about the same thing, but that calum is US, and would be cheaper. I can send him my chips out of my ecu now and hell upload them as a base map for no charge. Its like right around the $300 range, and I can sell my 2 enthalpy ecu's and afc neo for way more then that.

The main reason I want the calum is becuase i have a sohc to dohc swap in my car which makes it so you cant use the consultport anymore, he has it available via the ecu:icon_albino:

Ya, I dont think ill put tubes in, unless i start having some major issues. Putting air in them is easy. 8-10psi is around what I was thinking for tire pressure, not sure.

anyone know where to find some cheap weld draglites?

]]>https://fargostreet.com/post/172375https://fargostreet.com/post/172375Tue, 04 Sep 2007 15:35:07 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 14:26:04 GMT]]>

KA-T_240;182980 wrote:
lol, not going to be on until next spring. I dont think my current drive shaft will be loving life... I also want to try and get way lower in the 12s on street tires this year. hopefully at the last track day with stock suspension in the back and some 275s

Just go get it tuned and leave it alone...

]]>https://fargostreet.com/post/172370https://fargostreet.com/post/172370Tue, 04 Sep 2007 14:26:04 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 13:53:59 GMT]]>You don't need tubes in your slicks. You will just have to air them up before you go to the track every time.

Drive shaft loops are pretty cheap too and you can probably avoid having one for the last street legal day if you show up with street tires first. 😉

]]>https://fargostreet.com/post/172366https://fargostreet.com/post/172366Tue, 04 Sep 2007 13:53:59 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 13:24:39 GMT]]>you would need tubes in those for sure. some people dont run them, but the general consensus is that its a good idea.
AND, if you didnt know it already, heres a nice little suprise!
http://home.aanet.com.au/nistune/
Gary

]]>https://fargostreet.com/post/172365https://fargostreet.com/post/172365Tue, 04 Sep 2007 13:24:39 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 04:49:01 GMT]]>ya itll be painted and on next weekend. I can not afford, Drag lites, a custom drive shaft and drive shaft loop at the moment. Over the winter I should aquire all this. If someone want to sponser me:icon_thumright: then It can be arranged for the last street legal day.

I also am going to try and swap to a stand-a-lone or something better then my current tuning setup. I am thinking its going to be like a chipped ecu, but live edit and i can adjust it with my laptop when I want.

]]>https://fargostreet.com/post/172337https://fargostreet.com/post/172337Tue, 04 Sep 2007 04:49:01 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 04:45:05 GMT]]>ooo about time man. do we really have to wait till next year to see that thing get unleashed. either way im diggin the lip.

]]>https://fargostreet.com/post/172333https://fargostreet.com/post/172333Tue, 04 Sep 2007 04:45:05 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 04:35:04 GMT]]>lol, not going to be on until next spring. I dont think my current drive shaft will be loving life... I also want to try and get way lower in the 12s on street tires this year. hopefully at the last track day with stock suspension in the back and some 275s

]]>https://fargostreet.com/post/172326https://fargostreet.com/post/172326Tue, 04 Sep 2007 04:35:04 GMT<![CDATA[Reply to Got some sweet toys for the 240 today on Tue, 04 Sep 2007 04:30:59 GMT]]>faber finally got slicks y0!!!! d00d you need to brake boost that shiz @ 10mph with them slicks! lol

]]>https://fargostreet.com/post/172324https://fargostreet.com/post/172324Tue, 04 Sep 2007 04:30:59 GMT