<![CDATA[somone to build an intake manifold]]>http://www.galantvr4.org/ubbthreads/showflat.php?Board=UBB11&Number=554229&page=0&fpart=1 i need somone to buil somthing like this for me.. i would do it myself but dont have the time or tools and i dont want to spend 500+ for one

]]>https://fargostreet.com/topic/12547/somone-to-build-an-intake-manifoldRSS for NodeMon, 22 Jun 2026 13:02:22 GMTSun, 25 Nov 2007 08:20:00 GMT60<![CDATA[Reply to somone to build an intake manifold on Tue, 27 Nov 2007 07:32:39 GMT]]>yea cant find anything

]]>https://fargostreet.com/post/185214https://fargostreet.com/post/185214Tue, 27 Nov 2007 07:32:39 GMT<![CDATA[Reply to somone to build an intake manifold on Tue, 27 Nov 2007 04:09:08 GMT]]>check dsmtrader lately?

]]>https://fargostreet.com/post/185160https://fargostreet.com/post/185160Tue, 27 Nov 2007 04:09:08 GMT<![CDATA[Reply to somone to build an intake manifold on Tue, 27 Nov 2007 00:08:03 GMT]]>If i do get around to it i could do it all at work getting paid while im making it and buying only some of the aluminum so it will cost very little and my car is always a work in progress who knows where it will take me.

]]>https://fargostreet.com/post/185102https://fargostreet.com/post/185102Tue, 27 Nov 2007 00:08:03 GMT<![CDATA[Reply to somone to build an intake manifold on Mon, 26 Nov 2007 22:37:42 GMT]]>

GnArKiLl;195959 wrote:
i have a flange already..

wannabe- i would if i could find one! also its kinda nice when ppl ask "what brand is that?" and you can say i made that..

If someone other than you does the machining and someone else does the welding that doesn't mean you made it. It just means you paid for it to be made.

]]>https://fargostreet.com/post/185079https://fargostreet.com/post/185079Mon, 26 Nov 2007 22:37:42 GMT<![CDATA[Reply to somone to build an intake manifold on Mon, 26 Nov 2007 18:34:00 GMT]]>i have a flange already..

wannabe- i would if i could find one! also its kinda nice when ppl ask "what brand is that?" and you can say i made that..

]]>https://fargostreet.com/post/185026https://fargostreet.com/post/185026Mon, 26 Nov 2007 18:34:00 GMT<![CDATA[Reply to somone to build an intake manifold on Mon, 26 Nov 2007 18:29:33 GMT]]>just find a used Magnus...

]]>https://fargostreet.com/post/185024https://fargostreet.com/post/185024Mon, 26 Nov 2007 18:29:33 GMT<![CDATA[Reply to somone to build an intake manifold on Mon, 26 Nov 2007 18:28:26 GMT]]>http://www.rossmachineracing.com/

this should get you some stuff you need, but the flange will be spendy

]]>https://fargostreet.com/post/185023https://fargostreet.com/post/185023Mon, 26 Nov 2007 18:28:26 GMT<![CDATA[Reply to somone to build an intake manifold on Mon, 26 Nov 2007 17:38:27 GMT]]>

PSI2HI;195944 wrote:
W/o cams and a supporting turbo an intake of that nature will do you absolutely no good. Having the parts machined and built is the expensive part, not the welding.

On a side note if your not willing to pay for it you probably dont need it. Buy one off Ebay then kick yourself when it doesn't make power.
as far a s the set up it going on a car with a pte 57 trim, hks 272 cams, manely VS and retainers.. andi know the welding is the cheap part i just dont have the stuff to round out the holes..

]]>https://fargostreet.com/post/185015https://fargostreet.com/post/185015Mon, 26 Nov 2007 17:38:27 GMT<![CDATA[Reply to somone to build an intake manifold on Mon, 26 Nov 2007 17:18:36 GMT]]>W/o cams and a supporting turbo an intake of that nature will do you absolutely no good. Having the parts machined and built is the expensive part, not the welding.

On a side note if your not willing to pay for it you probably dont need it. Buy one off Ebay then kick yourself when it doesn't make power.

]]>https://fargostreet.com/post/185011https://fargostreet.com/post/185011Mon, 26 Nov 2007 17:18:36 GMT<![CDATA[Reply to somone to build an intake manifold on Mon, 26 Nov 2007 17:11:43 GMT]]>do either of you plan on making above 400 hp??? if not don't waste your time cuz it looks cool...

]]>https://fargostreet.com/post/185009https://fargostreet.com/post/185009Mon, 26 Nov 2007 17:11:43 GMT<![CDATA[Reply to somone to build an intake manifold on Mon, 26 Nov 2007 16:49:47 GMT]]>I think i might start putting something like that together at work for the teg

]]>https://fargostreet.com/post/185006https://fargostreet.com/post/185006Mon, 26 Nov 2007 16:49:47 GMT<![CDATA[Reply to somone to build an intake manifold on Sun, 25 Nov 2007 17:33:33 GMT]]>... just buy one ...

]]>https://fargostreet.com/post/184893https://fargostreet.com/post/184893Sun, 25 Nov 2007 17:33:33 GMT<![CDATA[Reply to somone to build an intake manifold on Sun, 25 Nov 2007 17:10:42 GMT]]>I've never understood those style of intake, wouldn't a more rounded one flow better? That and their ugly as hell..

]]>https://fargostreet.com/post/184890https://fargostreet.com/post/184890Sun, 25 Nov 2007 17:10:42 GMT<![CDATA[Reply to somone to build an intake manifold on Sun, 25 Nov 2007 12:53:32 GMT]]>just buy one cheap skate!

]]>https://fargostreet.com/post/184884https://fargostreet.com/post/184884Sun, 25 Nov 2007 12:53:32 GMT<![CDATA[Reply to somone to build an intake manifold on Sun, 25 Nov 2007 08:52:19 GMT]]>all i realy need are the parts cut and milled i cna have them welded here

]]>https://fargostreet.com/post/184879https://fargostreet.com/post/184879Sun, 25 Nov 2007 08:52:19 GMT<![CDATA[Reply to somone to build an intake manifold on Sun, 25 Nov 2007 08:41:38 GMT]]>all i have to say is good luck.... i know someone who could do it, but for anything under $500 it wouldn't be worth it.

]]>https://fargostreet.com/post/184878https://fargostreet.com/post/184878Sun, 25 Nov 2007 08:41:38 GMT