<![CDATA[Bump!]]>legacy image
legacy image
legacy image
someone with a router, help!

]]>https://fargostreet.com/topic/12566/bumpRSS for NodeThu, 28 May 2026 09:22:55 GMTMon, 26 Nov 2007 20:14:44 GMT60<![CDATA[Reply to Bump! on Mon, 03 Dec 2007 12:22:26 GMT]]>

thrash;197214 wrote:
Sure. http://www.mattevans.org/~matt/cars/e28m5/subwoofer/

A fellow BMW guy designed/built the box for me. The sub is from Elemental Designs. They seem to make cool products but their website NEVER stops spamming you once you buy something from them.

Now that I look at the pics, it must be a 6" ? Hard to tell 🙂

cool little box ya that looks like there 7kv. 6" sub i had 4 of those but gave two to my dad there fun and sound nice

]]>https://fargostreet.com/post/186295https://fargostreet.com/post/186295Mon, 03 Dec 2007 12:22:26 GMT<![CDATA[Reply to Bump! on Mon, 03 Dec 2007 06:05:23 GMT]]>That looks familiar.

The guy that designed/built the box told me which driver to get and I had it shipped directly to his place.

]]>https://fargostreet.com/post/186271https://fargostreet.com/post/186271Mon, 03 Dec 2007 06:05:23 GMT<![CDATA[Reply to Bump! on Mon, 03 Dec 2007 05:53:14 GMT]]>looks like their 7" driver http://www.edesignaudio.com/edv2/product_info.php?cPath=21&products_id=33 to me. Either way, that is a nice little subwoofer. I tried picking up eD but they pretty much just sell their own product w/o much of a dealer network....at least that is what Ben (owner?) told me when I asked.

]]>https://fargostreet.com/post/186267https://fargostreet.com/post/186267Mon, 03 Dec 2007 05:53:14 GMT<![CDATA[Reply to Bump! on Mon, 03 Dec 2007 04:32:25 GMT]]>

by the way do you have a pic of that install? i kinda wanna see that

Sure. http://www.mattevans.org/~matt/cars/e28m5/subwoofer/

A fellow BMW guy designed/built the box for me. The sub is from Elemental Designs. They seem to make cool products but their website NEVER stops spamming you once you buy something from them.

Now that I look at the pics, it must be a 6" ? Hard to tell 🙂

]]>https://fargostreet.com/post/186244https://fargostreet.com/post/186244Mon, 03 Dec 2007 04:32:25 GMT<![CDATA[Reply to Bump! on Mon, 03 Dec 2007 03:58:38 GMT]]>

thrash;197198 wrote:
IMO, sub boxes take up too much room.

I took the enormous enclosure w/ the 10" out of my M5's trunk and replaced it with an 8" cavity-molded-fiberglass enclosure under the rear bench.

Not as loud, but adds a nice bit of punch to most of what I listen to.. and it doesn't take up 40% of my trunk, and it doesn't slide around all over the place.

I'd be ashamed of myself if someone complimented my car stereo instead of my car, and I don't need to go deaf any faster. "Sufficient" bass, usable trunk. I like the combo.

and in your eyes that was a good idea and hell if i had that car i would do the same most likely. i guess its all really person dependent. I myself am a stereo guy id like a car thats show and sound instead of go. but hey thats just mean. each install has is purpose in is specific car. like i said if i had a guy were going fast in id do something small like you.

by the way do you have a pic of that install? i kinda wanna see that

]]>https://fargostreet.com/post/186241https://fargostreet.com/post/186241Mon, 03 Dec 2007 03:58:38 GMT<![CDATA[Reply to Bump! on Mon, 03 Dec 2007 03:54:38 GMT]]>

tjamz;197182 wrote:
I have no doubt that it was tuned good/built right since it was built to a specification of some sort. I always worry when I see ported boxes though, as many people (in their heads) think that they can use a smaller box since its ported, which you and I know is completely incorrect.

very true very ture

]]>https://fargostreet.com/post/186240https://fargostreet.com/post/186240Mon, 03 Dec 2007 03:54:38 GMT<![CDATA[Reply to Bump! on Mon, 03 Dec 2007 03:36:02 GMT]]>I agree...but if you are going to have one, do it right (which it sounds like you did in your case)

]]>https://fargostreet.com/post/186236https://fargostreet.com/post/186236Mon, 03 Dec 2007 03:36:02 GMT<![CDATA[Reply to Bump! on Mon, 03 Dec 2007 02:55:04 GMT]]>IMO, sub boxes take up too much room.

I took the enormous enclosure w/ the 10" out of my M5's trunk and replaced it with an 8" cavity-molded-fiberglass enclosure under the rear bench.

Not as loud, but adds a nice bit of punch to most of what I listen to.. and it doesn't take up 40% of my trunk, and it doesn't slide around all over the place.

I'd be ashamed of myself if someone complimented my car stereo instead of my car, and I don't need to go deaf any faster. "Sufficient" bass, usable trunk. I like the combo.

]]>https://fargostreet.com/post/186228https://fargostreet.com/post/186228Mon, 03 Dec 2007 02:55:04 GMT<![CDATA[Reply to Bump! on Mon, 03 Dec 2007 01:55:40 GMT]]>

MTXThunder9500;197165 wrote:
box was the same one i ran the sub in before i sold it to him. it did just great for the sub. 1.75 tuned to 35 hz i think it was 1.75 id have to look but it did just great

I have no doubt that it was tuned good/built right since it was built to a specification of some sort. I always worry when I see ported boxes though, as many people (in their heads) think that they can use a smaller box since its ported, which you and I know is completely incorrect.

]]>https://fargostreet.com/post/186212https://fargostreet.com/post/186212Mon, 03 Dec 2007 01:55:40 GMT<![CDATA[Reply to Bump! on Mon, 03 Dec 2007 00:16:33 GMT]]>

tjamz;196317 wrote:
It matters more actually. Did you build the box to spec or did you just throw something together (please tell me it was built to spec...ported subs can be very uncontrolled if the box is built wrong...which can lead to sub failure)

box was the same one i ran the sub in before i sold it to him. it did just great for the sub. 1.75 tuned to 35 hz i think it was 1.75 id have to look but it did just great

]]>https://fargostreet.com/post/186195https://fargostreet.com/post/186195Mon, 03 Dec 2007 00:16:33 GMT<![CDATA[Reply to Bump! on Wed, 28 Nov 2007 05:13:33 GMT]]>I bought caulking, but i got to ancy so its already in the car.. I have a few issues I need to resolve, this stupid speaker input thing sucks.

]]>https://fargostreet.com/post/185453https://fargostreet.com/post/185453Wed, 28 Nov 2007 05:13:33 GMT<![CDATA[Reply to Bump! on Wed, 28 Nov 2007 04:33:42 GMT]]>Not bad, I do hope you caulked the seems (yes, it is VERY important to do that on a ported enclosure too, more so than a sealed one actually)

]]>https://fargostreet.com/post/185443https://fargostreet.com/post/185443Wed, 28 Nov 2007 04:33:42 GMT<![CDATA[Reply to Bump! on Wed, 28 Nov 2007 00:18:49 GMT]]>built to spec. directions were for the same box that the guy I bought it from used...

]]>https://fargostreet.com/post/185371https://fargostreet.com/post/185371Wed, 28 Nov 2007 00:18:49 GMT<![CDATA[Reply to Bump! on Wed, 28 Nov 2007 00:00:33 GMT]]>

wannabe;196060 wrote:
Figured it wouldnt matter as much in a ported box...

It matters more actually. Did you build the box to spec or did you just throw something together (please tell me it was built to spec...ported subs can be very uncontrolled if the box is built wrong...which can lead to sub failure)

]]>https://fargostreet.com/post/185369https://fargostreet.com/post/185369Wed, 28 Nov 2007 00:00:33 GMT<![CDATA[Reply to Bump! on Tue, 27 Nov 2007 09:07:45 GMT]]>Sorry to say, but DeWalts' are terrible in ported boxes, I'd go with a sealed enclosure.:D

]]>https://fargostreet.com/post/185222https://fargostreet.com/post/185222Tue, 27 Nov 2007 09:07:45 GMT<![CDATA[Reply to Bump! on Tue, 27 Nov 2007 03:08:58 GMT]]>bumps for the taurus, nice

]]>https://fargostreet.com/post/185149https://fargostreet.com/post/185149Tue, 27 Nov 2007 03:08:58 GMT<![CDATA[Reply to Bump! on Tue, 27 Nov 2007 02:41:59 GMT]]>lol like i said this ones for the taurus... there will be no 100 degrees or "himidity" during the winter...

]]>https://fargostreet.com/post/185144https://fargostreet.com/post/185144Tue, 27 Nov 2007 02:41:59 GMT<![CDATA[Reply to Bump! on Tue, 27 Nov 2007 02:32:50 GMT]]>please bleach that shit or w/e. i know i don't want to be smelling deal blood once summer rolls around. 100* + himidity = matt puking

]]>https://fargostreet.com/post/185138https://fargostreet.com/post/185138Tue, 27 Nov 2007 02:32:50 GMT<![CDATA[Reply to Bump! on Tue, 27 Nov 2007 01:34:41 GMT]]>

weshole;195986 wrote:
Particle board???? Tisk, tisk, tisk.....

Figured it wouldnt matter as much in a ported box... this is for my taurus. the box for the miata will be a lot nicer...

]]>https://fargostreet.com/post/185127https://fargostreet.com/post/185127Tue, 27 Nov 2007 01:34:41 GMT<![CDATA[Reply to Bump! on Tue, 27 Nov 2007 01:33:15 GMT]]>deer blood. I used my dads truck to haul the wood, which was used to haul the 13 deer we got this year.

]]>https://fargostreet.com/post/185126https://fargostreet.com/post/185126Tue, 27 Nov 2007 01:33:15 GMT<![CDATA[Reply to Bump! on Tue, 27 Nov 2007 01:06:59 GMT]]>Is that blood I see??

]]>https://fargostreet.com/post/185118https://fargostreet.com/post/185118Tue, 27 Nov 2007 01:06:59 GMT<![CDATA[Reply to Bump! on Tue, 27 Nov 2007 00:51:04 GMT]]>Joel, you might as well come to UND, we have a full wood shop, including a CNC wood cutter, and all the other stuff in our department.

]]>https://fargostreet.com/post/185113https://fargostreet.com/post/185113Tue, 27 Nov 2007 00:51:04 GMT<![CDATA[Reply to Bump! on Mon, 26 Nov 2007 20:43:21 GMT]]>Particle board???? Tisk, tisk, tisk.....

]]>https://fargostreet.com/post/185053https://fargostreet.com/post/185053Mon, 26 Nov 2007 20:43:21 GMT