<![CDATA[RX-7 dyno day @ MA performance]]>Hey guys, Yesterday was a lot of fun down in plymouth. For those of you that didnt know, we hosted Steve Kan from Gotham racing to come up from Texas to tune our cars. Steve is one of the worlds best car tuners. He has done over 550 cars and known for his excellent work.

There were some pretty nice cars down there. most of us made over 400hp. We did have some issues. the first car of the day was a beautiful blue FD with a T51R Single turbo did he made 414hp @ 18psi but that was because he was loosing a lot of compression.

The green wide body had an HKS T04Z and made 444hp @ 15psi and race gas before his fuel pump maxed out.

I made 424hp @ 15psi with my T04Z. My boost was limited to 15psi because of my stock map sensor. My coolant fans would not turn on so we had to hot wire them from the battery just so I could dyno.

I left before the last two cars went. One guy had a T04R and the silver car had a GT35R. But over all it was a good day and a freakin blast. I will post some pics of the cars and here is a video of my dyno @ 15psi.

The white FD is their Shop car that has a 4g64 swap and a Bullseye Power S380 Turbocharger pushing 814hp w/out NOS. they are shooting for the 1000hp range. That car is sick

http://www.youtube.com/watch?v=POyniWi8ieQ

]]>https://fargostreet.com/topic/14136/rx-7-dyno-day-@-ma-performanceRSS for NodeThu, 28 May 2026 13:36:31 GMTSun, 25 May 2008 16:53:50 GMT60<![CDATA[Reply to RX-7 dyno day @ MA performance on Tue, 27 May 2008 18:10:59 GMT]]>Looks like some great numbers! At the end of the pull you can see the manifold start to get red! That's awesome 🙂

]]>https://fargostreet.com/post/208933https://fargostreet.com/post/208933Tue, 27 May 2008 18:10:59 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Tue, 27 May 2008 18:04:03 GMT]]>Those are some nice looking 7's. Too bad mine won't be running for a couple months yet, this would have been sweet to go to.

]]>https://fargostreet.com/post/208929https://fargostreet.com/post/208929Tue, 27 May 2008 18:04:03 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Mon, 26 May 2008 17:48:14 GMT]]>White FDSM
http://www.youtube.com/watch?v=m2jWfCgMnHI

]]>https://fargostreet.com/post/208850https://fargostreet.com/post/208850Mon, 26 May 2008 17:48:14 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Mon, 26 May 2008 15:06:43 GMT]]>

capitlj;220198 wrote:
Not bad now get some rims on that bizzo.

One thing at a time. This shit aint cheap. I need suspension first then rims and finally paint. hopefully all will be done this winter.

]]>https://fargostreet.com/post/208846https://fargostreet.com/post/208846Mon, 26 May 2008 15:06:43 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Mon, 26 May 2008 13:17:23 GMT]]>

Jim;220188 wrote:
Thats like a mile away from my house...

Haha, its pretty close to me too. Where are you living down here?

]]>https://fargostreet.com/post/208841https://fargostreet.com/post/208841Mon, 26 May 2008 13:17:23 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Mon, 26 May 2008 08:11:53 GMT]]>

KA-T_240;220213 wrote:
You run out of gas money already??:stirpot:
nope... just lazy

pretty sad when my truck gets better mpg.

]]>https://fargostreet.com/post/208837https://fargostreet.com/post/208837Mon, 26 May 2008 08:11:53 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Mon, 26 May 2008 06:52:11 GMT]]>

Parker;220212 wrote:
you give me a ride in your car.... then i will give you a ride in my car.... and then you will soon convert... lol

just dont plan on it being soon... lol

You run out of gas money already??:stirpot:

]]>https://fargostreet.com/post/208835https://fargostreet.com/post/208835Mon, 26 May 2008 06:52:11 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Mon, 26 May 2008 06:37:12 GMT]]>

fdfreak;220192 wrote:
I dont rememer, i forgot to take a pick of the computer screen. But I think it was around 325 ft-lb. the shop is going to email all of us our graphs.
you give me a ride in your car.... then i will give you a ride in my car.... and then you will soon convert... lol

just dont plan on it being soon... lol

]]>https://fargostreet.com/post/208834https://fargostreet.com/post/208834Mon, 26 May 2008 06:37:12 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Mon, 26 May 2008 02:22:26 GMT]]>Not bad now get some rims on that bizzo.

]]>https://fargostreet.com/post/208820https://fargostreet.com/post/208820Mon, 26 May 2008 02:22:26 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Sun, 25 May 2008 23:46:21 GMT]]>

Parker;220171 wrote:
what did you put down for torque?

I dont rememer, i forgot to take a pick of the computer screen. But I think it was around 325 ft-lb. the shop is going to email all of us our graphs.

]]>https://fargostreet.com/post/208814https://fargostreet.com/post/208814Sun, 25 May 2008 23:46:21 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Sun, 25 May 2008 21:29:10 GMT]]>Thats like a mile away from my house...

]]>https://fargostreet.com/post/208810https://fargostreet.com/post/208810Sun, 25 May 2008 21:29:10 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Sun, 25 May 2008 20:22:13 GMT]]>haters.

man I wish I would have known more about this event. nice numbers. that's exactly the whp numbe I made too. haha.

]]>https://fargostreet.com/post/208807https://fargostreet.com/post/208807Sun, 25 May 2008 20:22:13 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Sun, 25 May 2008 19:46:32 GMT]]>

Joel;220174 wrote:
the dyno doesnt read negetive numbers... 😉

perfect response.

]]>https://fargostreet.com/post/208806https://fargostreet.com/post/208806Sun, 25 May 2008 19:46:32 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Sun, 25 May 2008 19:38:18 GMT]]>

Joel;220174 wrote:
the dyno doesnt read negetive numbers... 😉

ahahahaha

]]>https://fargostreet.com/post/208805https://fargostreet.com/post/208805Sun, 25 May 2008 19:38:18 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Sun, 25 May 2008 17:34:29 GMT]]>

Parker;220171 wrote:
what did you put down for torque?

the dyno doesnt read negetive numbers... 😉

]]>https://fargostreet.com/post/208796https://fargostreet.com/post/208796Sun, 25 May 2008 17:34:29 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Sun, 25 May 2008 17:31:19 GMT]]>RX7s are so sexy. Sounds like it was a pretty sweet day.

]]>https://fargostreet.com/post/208795https://fargostreet.com/post/208795Sun, 25 May 2008 17:31:19 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Sun, 25 May 2008 17:18:50 GMT]]>nice rides for sure

]]>https://fargostreet.com/post/208794https://fargostreet.com/post/208794Sun, 25 May 2008 17:18:50 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Sun, 25 May 2008 17:15:57 GMT]]>what did you put down for torque?

]]>https://fargostreet.com/post/208793https://fargostreet.com/post/208793Sun, 25 May 2008 17:15:57 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Sun, 25 May 2008 17:07:58 GMT]]>Good #'s. BTW, that widebody is sick.

]]>https://fargostreet.com/post/208790https://fargostreet.com/post/208790Sun, 25 May 2008 17:07:58 GMT<![CDATA[Reply to RX-7 dyno day @ MA performance on Sun, 25 May 2008 17:06:18 GMT]]>NICE! looks like a blast!

]]>https://fargostreet.com/post/208789https://fargostreet.com/post/208789Sun, 25 May 2008 17:06:18 GMT