<![CDATA[HELP! How do you tighten this clamp???]]>I'm putting a new CV boot on and I can't fucking figure out how to get this clamp to tighten. Anybody have a clue how it works? It doesn't just pull tight...:icon_scratch:

]]>https://fargostreet.com/topic/17812/help-how-do-you-tighten-this-clampRSS for NodeThu, 28 May 2026 03:34:21 GMTFri, 21 Aug 2009 20:18:14 GMT60<![CDATA[Reply to HELP! How do you tighten this clamp??? on Mon, 31 Aug 2009 07:30:17 GMT]]>

ichibankilla;286626 wrote:
Just use a big zip tie, nip off the excess and call it a day. 😄

worked for me for four years

]]>https://fargostreet.com/post/275025https://fargostreet.com/post/275025Mon, 31 Aug 2009 07:30:17 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Mon, 31 Aug 2009 06:58:10 GMT]]>Just use a big zip tie, nip off the excess and call it a day. 😄

]]>https://fargostreet.com/post/275024https://fargostreet.com/post/275024Mon, 31 Aug 2009 06:58:10 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Mon, 31 Aug 2009 02:24:29 GMT]]>i have the tool that will work on the style clamp you already have if you want to borrow it. if you think you'll ever buy this type of clamp or do this job again, you may as well buy the tool, but whatever. LMK if you want to pick it up. I'll take a $10 deposit. You give me back a working tool, I give you back your working $10 🙂

]]>https://fargostreet.com/post/275001https://fargostreet.com/post/275001Mon, 31 Aug 2009 02:24:29 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Sun, 30 Aug 2009 04:32:19 GMT]]>Those are called Oetiker clamps. I think I paid something like $30 for the Oetiker/Knipex tool for them.

legacy image

]]>https://fargostreet.com/post/274941https://fargostreet.com/post/274941Sun, 30 Aug 2009 04:32:19 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Wed, 26 Aug 2009 12:21:02 GMT]]>just buy an aftermarket axle their like 99 bucks. lifetime warranty.

or buy the correct tool and do it right, ive had great luck with those clamps if you do it right

]]>https://fargostreet.com/post/274561https://fargostreet.com/post/274561Wed, 26 Aug 2009 12:21:02 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Wed, 26 Aug 2009 03:34:14 GMT]]>so does this guy...
http://forums.vwvortex.com/zerothread?id=3344208

]]>https://fargostreet.com/post/274542https://fargostreet.com/post/274542Wed, 26 Aug 2009 03:34:14 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Wed, 26 Aug 2009 03:32:14 GMT]]>I'm not sure what the name of the clamp is but it is a "pinch style" clamp...there is a special tool to do it...but a pair of side cutters will work just fine with them as long as you don't actually cut the clamp in the process....

kinda hard to see...but this guy uses the style clamp that is better...http://www.hasengeeks.com/projects.php?page=axles

]]>https://fargostreet.com/post/274541https://fargostreet.com/post/274541Wed, 26 Aug 2009 03:32:14 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Wed, 26 Aug 2009 01:38:00 GMT]]>

darkelvis;286124 wrote:
those clamps are GARBAGE...if you want any of your grease to stay in that joint then go buy the other style clamp. if you need to use that one then I would suggest getting the tool to do it...you can do it without the tool but it will fail even sooner. 🙂

What clamp do you suggest? If it's something that's cheaper than the $9.99 tool and doesn't require me to buy another tool I'll definitely buy the ones you suggest....

]]>https://fargostreet.com/post/274529https://fargostreet.com/post/274529Wed, 26 Aug 2009 01:38:00 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Tue, 25 Aug 2009 23:53:20 GMT]]>those clamps are GARBAGE...if you want any of your grease to stay in that joint then go buy the other style clamp. if you need to use that one then I would suggest getting the tool to do it...you can do it without the tool but it will fail even sooner. 🙂

]]>https://fargostreet.com/post/274522https://fargostreet.com/post/274522Tue, 25 Aug 2009 23:53:20 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Mon, 24 Aug 2009 14:07:14 GMT]]>Its the $9.99 I sell and then that job is easy as pie.

]]>https://fargostreet.com/post/274329https://fargostreet.com/post/274329Mon, 24 Aug 2009 14:07:14 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Sun, 23 Aug 2009 22:58:37 GMT]]>Here are the pics of the clamp. What tool is it?

Photo 37.jpg
Photo 39.jpg

]]>https://fargostreet.com/post/274279https://fargostreet.com/post/274279Sun, 23 Aug 2009 22:58:37 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Sun, 23 Aug 2009 22:19:55 GMT]]>depends on the style clamp...there are two common ones...both have special tools to do it but both can be done without them....pics of clamp.

]]>https://fargostreet.com/post/274278https://fargostreet.com/post/274278Sun, 23 Aug 2009 22:19:55 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Sat, 22 Aug 2009 23:29:39 GMT]]>Or you can go to Oreilly and get the proper tool for like $8

Edit $9.99 I just looked.

]]>https://fargostreet.com/post/274229https://fargostreet.com/post/274229Sat, 22 Aug 2009 23:29:39 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Sat, 22 Aug 2009 12:56:22 GMT]]>

ticklemedaly;285817 wrote:
side cutters/dikes will work just fine to tighten up that band

that and a punch will do the trick

]]>https://fargostreet.com/post/274217https://fargostreet.com/post/274217Sat, 22 Aug 2009 12:56:22 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Sat, 22 Aug 2009 11:07:43 GMT]]>side cutters/dikes will work just fine to tighten up that band

]]>https://fargostreet.com/post/274215https://fargostreet.com/post/274215Sat, 22 Aug 2009 11:07:43 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Fri, 21 Aug 2009 21:26:42 GMT]]>

Bryce;285772 wrote:
Awww "Grips" can't do it with out a special tool!?

O I could with my pliers and my "GRIPS"

]]>https://fargostreet.com/post/274173https://fargostreet.com/post/274173Fri, 21 Aug 2009 21:26:42 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Fri, 21 Aug 2009 21:17:19 GMT]]>If you really have to ask this question, you should not be doing the job. But if you insist, there is a special tool for the job.

]]>https://fargostreet.com/post/274171https://fargostreet.com/post/274171Fri, 21 Aug 2009 21:17:19 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Fri, 21 Aug 2009 21:06:44 GMT]]>

gsrEK;285770 wrote:
gota get a special clamp tool or bust ur hand trying to with a pliers

Awww "Grips" can't do it with out a special tool!?

]]>https://fargostreet.com/post/274170https://fargostreet.com/post/274170Fri, 21 Aug 2009 21:06:44 GMT<![CDATA[Reply to HELP! How do you tighten this clamp??? on Fri, 21 Aug 2009 20:43:40 GMT]]>gota get a special clamp tool or bust ur hand trying to with a pliers

]]>https://fargostreet.com/post/274168https://fargostreet.com/post/274168Fri, 21 Aug 2009 20:43:40 GMT