<![CDATA[Crower spring and retainer kit and cam??]]>i was just wondering if any body has ever used Crower cams and retainers and springs before. would some one recomend them to use on a sohc civic?

i found a spring and retainer kit for 302.95. and the stage 2 cam for 319.95 from morepowerracing.com

does anybody know where i could find them for cheaper without going on ebay??

]]>https://fargostreet.com/topic/2820/crower-spring-and-retainer-kit-and-camRSS for NodeThu, 28 May 2026 10:34:31 GMTWed, 25 May 2005 22:52:23 GMT60<![CDATA[Reply to Crower spring and retainer kit and cam?? on Tue, 31 May 2005 03:33:41 GMT]]>

97Cav wrote:
i was just wondering if any body has ever used Crower cams and retainers and springs before. would some one recomend them to use on a sohc civic?

i found a spring and retainer kit for 302.95. and the stage 2 cam for 319.95 from morepowerracing.com

does anybody know where i could find them for cheaper without going on ebay??

Talk to focus guys... www.focaljet.com and www.focusfanatics.com

Crower seems to be the most popular cam for the focus. See a lot of guys using them and havent heard much complaint about them at all. You will find a lot of Zetec guys using them... no SVT guys because the SVT cams are still being worked on. So best bet is to check out Zetec forums... if you wanna ask them about their cams.

]]>https://fargostreet.com/post/50038https://fargostreet.com/post/50038Tue, 31 May 2005 03:33:41 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Mon, 30 May 2005 09:23:44 GMT]]>i was looking at toda and skunk2 for b series

]]>https://fargostreet.com/post/49987https://fargostreet.com/post/49987Mon, 30 May 2005 09:23:44 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Mon, 30 May 2005 08:17:51 GMT]]>I've heard nothing but good things about the crower cam for hondas... also people have good luck with the skunk2 cams.

]]>https://fargostreet.com/post/49978https://fargostreet.com/post/49978Mon, 30 May 2005 08:17:51 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Sun, 29 May 2005 22:57:47 GMT]]>i might just use the crower springs and retainers and find a different cam.

]]>https://fargostreet.com/post/49898https://fargostreet.com/post/49898Sun, 29 May 2005 22:57:47 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Sun, 29 May 2005 17:02:32 GMT]]>

bomexcivic00 wrote:
there is a difference between a civic and a talon! but thanks for the advice so far.

97Cav posting as bomexcivic00

Really? had no clue. I think crower is decent. slap em in.

]]>https://fargostreet.com/post/49875https://fargostreet.com/post/49875Sun, 29 May 2005 17:02:32 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Sun, 29 May 2005 02:29:48 GMT]]>

92TSIpos wrote:
Crower is kick ass for valve springs and retainers, but I heard the cams suck wang. didnt tufte go through like 3 sets of cams in his talon?

there is a difference between a civic and a talon! but thanks for the advice so far.

97Cav posting as bomexcivic00

]]>https://fargostreet.com/post/49832https://fargostreet.com/post/49832Sun, 29 May 2005 02:29:48 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Sat, 28 May 2005 21:54:49 GMT]]>Crower is kick ass for valve springs and retainers, but I heard the cams suck wang. didnt tufte go through like 3 sets of cams in his talon?

]]>https://fargostreet.com/post/49803https://fargostreet.com/post/49803Sat, 28 May 2005 21:54:49 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Fri, 27 May 2005 22:35:25 GMT]]>i want too soo bad, but no money right now, time for bank loan!!!

]]>https://fargostreet.com/post/49720https://fargostreet.com/post/49720Fri, 27 May 2005 22:35:25 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Fri, 27 May 2005 08:17:44 GMT]]>I agree.... boost that hog.

]]>https://fargostreet.com/post/49670https://fargostreet.com/post/49670Fri, 27 May 2005 08:17:44 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Fri, 27 May 2005 05:46:18 GMT]]>dont lie, you want boost!

]]>https://fargostreet.com/post/49666https://fargostreet.com/post/49666Fri, 27 May 2005 05:46:18 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Fri, 27 May 2005 05:36:34 GMT]]>

btleier wrote:
well you better decide what you wanna do cause you will want to do very different c/r pistons depending on if you're going to go with n/a or forced induction

well i will have to look into that.

]]>https://fargostreet.com/post/49663https://fargostreet.com/post/49663Fri, 27 May 2005 05:36:34 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Fri, 27 May 2005 00:27:18 GMT]]>well you better decide what you wanna do cause you will want to do very different c/r pistons depending on if you're going to go with n/a or forced induction

]]>https://fargostreet.com/post/49616https://fargostreet.com/post/49616Fri, 27 May 2005 00:27:18 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Thu, 26 May 2005 23:02:45 GMT]]>

btleier wrote:
define what you wanna do with your "rebuild"

i would like to stop it from smoking, i would like to put aftermarket rods and pistions in. and beef it up just a bit incause i do deside to turbo.

]]>https://fargostreet.com/post/49598https://fargostreet.com/post/49598Thu, 26 May 2005 23:02:45 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Thu, 26 May 2005 21:32:29 GMT]]>well i have heard the crower cams on dsm aren't very good. quality issues i think, but i don't know about there honda stuff or valvetrain stuff.

]]>https://fargostreet.com/post/49587https://fargostreet.com/post/49587Thu, 26 May 2005 21:32:29 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Thu, 26 May 2005 16:08:54 GMT]]>I had the Crower springs and retainers in my tally whacker, they worked great. I know a guy from the cities that used Crower cams in his DSM and they screwed up, don't know if it was just a rare quality issue or what.

]]>https://fargostreet.com/post/49555https://fargostreet.com/post/49555Thu, 26 May 2005 16:08:54 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Thu, 26 May 2005 07:22:57 GMT]]>define what you wanna do with your "rebuild"

]]>https://fargostreet.com/post/49534https://fargostreet.com/post/49534Thu, 26 May 2005 07:22:57 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Thu, 26 May 2005 06:13:33 GMT]]>

integra_gsr98 wrote:
I can get them for you Frietag. Just let me know. I am pretty sure I can beat those prices.

sweet, i will let you know, i'm thinking of trying to get a loan and then rebuild my motor, and put a little more beefed up shit in it because i have a problem with high reving my car when i deside to speed. plus it's nice to have alittle more power too.

how much do you guys think it would cost to rebuild a d16??

]]>https://fargostreet.com/post/49530https://fargostreet.com/post/49530Thu, 26 May 2005 06:13:33 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Thu, 26 May 2005 04:24:46 GMT]]>I can get them for you Frietag. Just let me know. I am pretty sure I can beat those prices.

]]>https://fargostreet.com/post/49512https://fargostreet.com/post/49512Thu, 26 May 2005 04:24:46 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Thu, 26 May 2005 04:14:46 GMT]]>I just finished putting Crower springs and Ti retainers in the race engine. Seems to be good quality stuff. Compressing the springs to get the retainers and keepers in was a royal pita tho.

]]>https://fargostreet.com/post/49510https://fargostreet.com/post/49510Thu, 26 May 2005 04:14:46 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Thu, 26 May 2005 03:38:52 GMT]]>

darkelvis wrote:
Personally I'd use the zex cam that lets you use your stock springs and retainers.

It depends what you wanna do, maybe he wants to safely rev higher. In which case you would want aftermarket valves, springs, retainers.

]]>https://fargostreet.com/post/49505https://fargostreet.com/post/49505Thu, 26 May 2005 03:38:52 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Thu, 26 May 2005 02:36:19 GMT]]>I've used Crower cams and connecting rods back when I had my '70 Chevelle and '69 Nova. Have nothing bad to say about them. I could only assume that their quality and performance would carry over to anything that they make including the pieces for your Honda.

]]>https://fargostreet.com/post/49504https://fargostreet.com/post/49504Thu, 26 May 2005 02:36:19 GMT<![CDATA[Reply to Crower spring and retainer kit and cam?? on Thu, 26 May 2005 02:32:52 GMT]]>Personally I'd use the zex cam that lets you use your stock springs and retainers.

]]>https://fargostreet.com/post/49503https://fargostreet.com/post/49503Thu, 26 May 2005 02:32:52 GMT