ok finally got the time now here's my pics.

First off this is the first time i've ever posted a ton of pics, so here goes.

Here's old KA i blew

Heres RB on floor with Subframe, ready to get put in

Insert Engine Here

Here is RB with wiring Harness on and ready

Here is Rb in car w/ harness

Here's petey taking chains off of RB

Here is a annoying and Bright pic of the clearence from radiator of RB

Here is the passenger side tophat mount

Driverside Tophat mount and Turbo With a rag in it

Here's all the room i have between the bellhousing and the firewall on the passenger side.

And Here's all the cm of clearence that the speedo sensor has

This is basically how the engine is placed in the car, it's pretty much as far back as it can go......for that whole weight balance thing......apparently the tophat mounts do that, looks right though

So in my quest for a Cheaper Install, i bought Rb20 kit after calling tophat too see if it would work, the said the motor mounts would........so in my glee, i bought them for $150, well this is why it's for a rb20, the tranny mount, so petey did some custom fab.

Here's the Driverside

And Here's a overall view of the custom fab and tranny

Here's the overall view from the tranny.....

Here's the issue that is being solved by a custom downpipe, notice the steering nuckle, right in the way of the downpipe.......so hopefully we will have a atmospheric dump for the waste gate.......and 3" turbo back.

and here's my random pile of shit.

I have more pics, so if u need to see more lemme know i can get them up in here