Status of your project car...

[bubba]

tjamz;211404 wrote:
Depending on which stage of my project you are talking about I'm either almost done or barely started. Basically, I need a new BOV and a good tune on the dyno and I'm set w/ the current motor setup. My 2nd motor is nearly complete, just awaiting cams and a good P&P on the heads....but I really don't want to install that until I get to the next phase involves a different transmission as well as a new rear end and drive shaft...and I've barely started even thinking about that yet.

The stage ur planning on finishing first, lol... I know what u mean Im doing "stage 1" right now...prob got a few more to go over the years...

[Afsil80]

KA-T_240;211403 wrote:
did you get your block and head properly decked for the cometic? Do not want more leaks

No, I actually decided to make the surface as rough as sandpaper.

Doosh.

integra_gsr98;211423 wrote:
I bought a house thanks to Bjornstad so my project has yet to begin. Oh and the integra is way on the side burner now. Home ownership > cars.

Haha, this kinda sounds like my friend Matt. Has everything in the world to make a hatch or Integra run 10's in his garage. But no car to put it all into, haha.

Now he bought a house, and says he'll get the car once he has the funds again.

[juan]

my project car is still my daily driver and my only car. i havent really done anything with it so far but i will be doing what i can when i can... first will be a swap... anybody that knows my car will fully understand.

[itRfan]

well i voted "barley done', considering that i just bought my car and will be buying another one here soon. So i will be deciding between the two when the time comes there are very few on here that understand what im talking about. But we will see what happens,through the summer.

[Bunique]

I got a lot of stuff I still want to do. For now I'll be happy if I can get my interior somewhat done before P10.

[z31]

tjamz;211404 wrote:
Depending on which stage of my project you are talking about I'm either almost done or barely started. Basically, I need a new BOV and a good tune on the dyno and I'm set w/ the current motor setup. My 2nd motor is nearly complete, just awaiting cams and a good P&P on the heads....but I really don't want to install that until I get to the next phase involves a different transmission as well as a new rear end and drive shaft...and I've barely started even thinking about that yet.

You mean to tell me you going to monkey with a car that already runs and drives? :icon_scratch:

[b almer]

all that is left is to put my turbo on but i am trying to have it done for the tintmasters show and shining in G-town

[Bookem]

Grand Am = trans, clutch, struts, springs, hub bearings, ball joints, tie rods
Legacy = rims
Burban = project that will never end
Bike = sell
I don't see a category for all those :icon_scratch:

[zbrown]

really now............ is anybodies really ever done

I'd like to get an auto done and maybe actually tune and do more than 15 lbs....... The silly rotard whispers that it wants to try 30lbs with the 42 every time i am in the garage, so we will see

no IC anymore and more meth inj. too........ No more stinky RFL anymore either, some of you should be proud, specially you dad

[no_slow_clap]

o damn where do i start...

WELL>>>>

Coupe...gone

Hatch...totalled

Tracker...DD

i think im in pretty good shape to ready for when the snow melts and doesnt come back.

[CivicEX7777777]

Just started up with the G5, gonna be a long process, wont be done for years if ever

[Evan]

Mines all tore apart, as soon as college is down the motor is getting sent to cali to get sleeved etc etc. It might be running this summer.

[SPANISH-RICE]

ooo so close!

[zbrown]

SPANISH-RICE;211645 wrote:
ooo so close!

That is supposed to be a turbo??

[SPANISH-RICE]

no its my new hair dryer. i need at least 50 lbs/min to cool my weave

[revolutionz_s13]

i have a bunch of parts....i just need to find ambition to put them all on...and other shit needs to come off of fucking backorder.