Valve cover question...
-
99civic;297422 wrote:
ok well i was thinking about painting my valve cover here soon but didnt know how to go about preping it... cause it has the wrinkle finish on it but i dont know if its powdercoated... i was gonna have someone sand blast it but they told me it would just eat into the aluminum and it would bounce off if it was powdercoated.... have anyone of you delt with this type of stuff..... sorry i sound like a noob but i just deal with the basic painting of cars never done a cover like this... thanksPowdercoat can be sandblasted, but will probably chew up the aluminum, try aircraft paint stripper. It will remove both powdercoat and paint.
-
just use a powerfull paint remover like the jelly kind you paint on with a brush to remove the powder coat. Then clean it and prep like normal.
don't sand blast unless your willing to have it cleaned professionaly, as the blast media can get trapped in the baffels and reak havok on the valvetrain if not fully cleaned out.
I would recomend powdercoating over painting, but i just prefer the durability that powdercoating prevides.
-
Beaner...Do not blast it remember i had mine blasted and it took a couple hours and a box of 180grit to prep it for paint. Stop into Vogel get some paint remover and take it to powdercoat professionals and get it coated if you want it powdercoated. They do an insane job, you have seen my under braces. They also have endless colors to chose from.
-
BomexE;297428 wrote:
Beaner...Do not blast it remember i had mine blasted and it took a couple hours and a box of 180grit to prep it for paint. Stop into Vogel get some paint remover and take it to powdercoat professionals and get it coated if you want it powdercoated. They do an insane job, you have seen my under braces. They also have endless colors to chose from.I wouldnt let those idiots powdercoat a dog dish. Take them to Neils.
-
63vette;297429 wrote:
I wouldnt let those idiots powdercoat a dog dish. Take them to Neils.They have done all my stuff and Tony's S2K and everything has turned out flawless for us, don't know about others results but no complaint from us. Neil's does good work as well though too, from what I have seen.
-
BomexE;297430 wrote:
They have done all my stuff and Tony's S2K and everything has turned out flawless for us, don't know about others results but no complaint from us. Neil's does good work as well though too, from what I have seen.Next time you see them ask them about the great job they did on my corvette frame which cost me 300 in powdercoat (I supplied) which was a candy over burgundy that they swore up and down would be no problem at all. It was the blotchiest joke I have ever seen in my life, they were embarrassed to even show it to me, then said they could fix it.... After 4 layers of powder it was brown and I had to have it all sandblasted which took 8 hours and re-coated by Neils. I should have sued. Midwest will do black, silver and any color going down the production line for racers for a minimal charge. They did all the silver tin work in my corvette and it was flawless. Midwest likes beer.
-
Bp-08;297435 wrote:
Screw neils, they are a bunch of alcoholic hippies with no work ethic.
I couldn't care less if they are crackheads and I dont know any of them personally. I have done business with them several times and they have done quality work at a good price and delivered on time. Thats all I care about. -
63vette;297436 wrote:
I couldn't care less if they are crackheads and I dont know any of them personally. I have done business with them several times and they have done quality work at a good price and delivered on time. Thats all I care about.You got lucky! When I worked there powdercoat had rework every day! I was a painter.
-
63vette;297442 wrote:
Maybe they both have new crews now. None the less, I still will take everything I can to Carl at Midwest then to Neils. Powdercoat Pros cost me money and time. I wont do business with them again.I worked for neils about a month ago. They might of got a new crew now, because if they kept to their word about firing people everyone that worked there should be fired by now! I dont know how many times a week someone called in sick because they were hungover! They lost their John Deere powder coat job because they sucked so much!
-
Bp-08;297443 wrote:
I worked for neils about a month ago. They might of got a new crew now, because if they kept to their word about firing people everyone that worked there should be fired by now! I dont know how many times a week someone called in sick because they were hungover! They lost their John Deere powder coat job because they sucked so much!You were fired?...weird.
Yeah i was going to say, I was pretty sure that Midwest had the John Deere account...
-
anyways thanks guys... scott ill come in some time and pick that stuff up... im gonna paint the cover cause its a custom one that im sure the powdercoat wont match... but ill get it done here soon and post up picks
1999 civic ex - 472whp 19psi e85
2000 civic SiR - jdm sickness
1988 chevy s10 blazer - lowrider
1979 lifted fullsize chevy - mud truck
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login