Anyone selling a 250 motorcycle? Let me know

[email protected]

Looking for a small amp to run one 8 inch sub.

:icon_salut::icon_scratch:

1998 Honda Civic EX Coupe - red
-108000 miles (approx 60k on the D15b swap)
-5 speed manual
-Currently no AC or PS (re-circ'd back to the rack)
-Cross-drilled front rotors
-Civic Si tail lights
-Good tires on steelies with OEM hubcaps

Overall the car is in good condition. There is nothing mechanically wrong with it. For the last 5 years, it has been my little brother's college car and was parked for most of its life. He typically got between 30-36mpg, mainly in and around Fargo.

Car is located in south Fargo. More pictures below**

SOLD!

I am trying to fund my h/c set up, and have lost interest in NO2

I am selling my single stage Gen 2 NX wet kit, complete with all the parts that come with the kit, tps, 10 lb bottle, fpss, all the jets, the solenoids including the ice man purge valve. Also includes a bottle warmer, blow down tube, remote bottle opener, brackets, ash tray switch panel, Everything. I do not have pics, but can get them if asked. Paid well over $1300 for everything. Everything works, I even have then instructions and original box. The only down side is the remote opener rubber on the motor is starting to deteriorate. This is cosmetic, and pretty common. I have only used this system a couple times. Let me if you have any questions on it. Asking $700 shipped.

26x10.5x16.

These do not come with the rim.

3 passes on them.
$200.

Does anybody know if there is a place in fargo that sell's 1 5/8 .134 dom wall tubing. I need about 20 feet or more to finish my roll cage.

I have (2) Atomic Apocalypse 8's in box for sale. Those that know my car, these are the ones I ran last year. If you heard them, you know they POUND. I pulled a 139.7 on music on the TL with this set up with the subs seeing about 500WRMS ea. It comes as you see in the pic. Im selling these crackhead cheap so someone is gonna get a good deal on this. (below dealer cost on the subs and throwing the box in). $300.00 FIRM.

This one has 12 views as of right now - I'm sure it'll get more views after being removed. Any of those views will be a complete waste of time. Reading this is fun though, isn't it?

Selling a brand New in never been opened plastic case
CVA 209 Magnum Break-Action Muzzleloader

"America's #1 Muzzleloader"

PR2110VP - Wolf 209 Magnum Outfit
.50 Caliber Break Action, Drilled & Tapped 209 Ignition, Fiber Optic Sights Includes Complete Shooting instructions and Educational DVD
call 701-540-7510 if you are interested! Thanks!

[legacy attachment 7147]

[legacy attachment 7148]

[legacy attachment 7149]

[legacy attachment 7150]

[legacy attachment 7151]

[legacy attachment 7152]

Hey, My names Robert i drive a 300zx twin turbo on and off during the summer its not my DD, and currently drive a 96 honda accord for my winter car, i also have a mazdaspeed 6 thats more my DD during the summer and on and off during the winter. I make it to almost every car event in nd/mn every year and try to make 1 Z event as well i was born in tennesee but ive lived in several states my father owes his own trucking company so moved around alot as a kid lived the biggest part of my life in florida though. Now in fargo nd july of 2010 due to a good job, i know alot of car enthusiest in the area already but always like to meet and know more.

Is there anyone in the FM area that wants it (oil burner furnace)? Otherwise I'll just keep dumping it at O'Reilly's.
I don't end up with a hell of a lot (service on 4 personal vehicles and a motorcycle) but I have about 5 gallons sitting in the garage.

Happy Birthday!

**<u>It's not too late to get some tires for the 2-day!!! </u>**Hey all, time to get rid of some things. I'll get to the details.

2x Toyo Proxes TQ tires in 315/35/17. Plenty of tread left, nothing wrong with them at all. Just got a quote for the pair new and it was just shy of $600. That being said I'm selling them for $250 <u>OBO</u>

Mickey Thompson E.T. Street bias ply tires (26x11.5x17) mounted on OEM 03/04 Cobra wheels(17x9, 26mm offset). These things hook very well on the track. Looking to get $450 <u>OBO</u> for the whole setup.

Dunlop Graspic DS-3 winter tires mounted on Sport Edition wheels, 5x114.3, 16x7 w/ a 35mm offset. The tires are 205/55/16. Load of tread left, the tires were only used for 1 1/2 seasons. Had absolutely no issue getting around town with these on. Asking $450 <u>OBO</u>.

I will be down in Fargo this weekend for the 2-day event so I'll be able to bring any of these down. If you want the Toyo tires for the track I'll meet you half way on a day of your choosing, my schedule is pretty open, I'm coming from GF. Remember all prices are OBO!

I can be contacted via private message on here, or on my cell (7o1) 33zero-84one2. I prefer text as I rarely answer if it's a number I am not familiar with.

-Eric

Just picked up a 97 Montero my customer traded in. Planning on doing some tires, safari rack, bull bar and some lights. Any suggestions on parts would be wonderful. I think I am going to have to watch ebay/craigslist to find a used brush guard/ Bull bar. There is none out there that are decently priced on the web.

Anyone who knows someone with a montero this body style, with a bar on the front of it, I would be interested in buying it regardless of condition. Also, any suggestions on parts/mods are welcome, I'm out of my element on this one.

hey guys Ive been working on my second Z32TT and modding it all winter from bone stock and i need my stock chip in the ecu de soldiered and a socket soldiered in so i can install a eprom chip with a Conservative tune on it until i can the car pro tuned and i really don't want to send my ecu to one of the company's that specializes in the car to get it done because there all in southern states is there anywhere in the Fargo moor head area that could perform this task and is good at it since its a technical important part of the car thanks.

Here are some photos of my machine shop Midwest Welding & Drive. We primarily specialize in drive shaft and pto work whether it be repairing old units to building new. We also do a lot of machining and fabrication work...obviously. Another venture we have decided to take is line boring. Just ordered a new portable line boring setup the other day so we can repair just about any hole that has a pin for a pivot(pay loaders, excavators, skid steers, etc...)
One of the key way cutters

Gould & Eberhardt metal shaper

Cincinnati key way cutter

Big fricken grinder

Morris drill press/boring machine

Aluminum band saw

Steel band saw

Chop saw

Christ is there even anybody coming to this site anymore? This is pathetic, DAYS without new posts! Whats everybody doing?

I pass a silver Impreza coupe with yellow fogs on the way to work just about every day, on 7th Ave. N between 25th and 14th Streets.

Anyone on here? Nice looking coupe!

Do not give them your money.