Honda stuff for sale!
-
If you are looking for a motor mount or perhaps a flywheel bolt this is not for you, but if you need some go fast parts we can talk. So PLEASE don't call me to part things out unless it is a swap being parted from a car!
If interested in any thing please call (701)269-4989. THANKS! I am not on here much so please call!! WILL CONSIDER LEGIT OFFERS!!!
ROSSUSDM B18C1 swap- 20 miles on rebuild, bored .010, Block guard, SRP 9.2:1 forged pistons, Eagle H-beams, ACL rod and main bearings, Golden eagle head studs, Crower stainless valves, Crower dual springs and Ti retainers, Skunk2 Pro series intake, Skunk2 Pro series 68mm throttle body, Skunk2 cam gears, 8 lb flywheel, Stage 3 six puck clutch, Billet fuel rail, AEM fuel pressure regulator, MSD ignition, USDM GSR tranny, shift linkage and new axles. NO INJECTORS.$4,000 OBO. ALL aftermarket parts are new!!
Straight line turbo kit- Nick Thompson's old setup, Garret T-67 with 150 miles on rebuild, SLS topmount manifold, SLS 3in down pipe, SLS double backdoor FMIC, 2.5in stainless charge pipe, Tial wastegate, New Greddy RS BOV, oil lines, all T clamps and fittings, 550 or 880 injectors. $2500 firm.
I will sell the above listed with the carbon fiber products, wheels and suspension listed below with my 98 unfinished shell. The shell is rust free, shaved mouldings and primed. I will throw in the gallon of PPG black with gold pearl ( hatch jam is jammed with it). The interior is black with leather. Clean title. $8,000 firm. Call for further details ( good ones).
Will sell GSR swap, turbo kit, P28 with Hondata S300 and GM 3bar map for $6,000 CASH.
USDM B18C1 swap- 5 miles on rebuild, stock bore, block guard, CTR pistons,billet fuel rail, ITR head (exstensive porting, polished, bronze valve guides DONE and STAMPED by KG ENGINEERING), stainless valves, BLOX dual springs and Ti retainers, BLOX HSL stage 3 cams, JG engineering cam gears, BLOX intake, GSR tranny, shift linkage and new axles. $2800 FIRM
ALSO WILL SELL IN A 94' red civic dx coupe ( fairly clean) with new SKUNK2 stainless catback and coilovers for $4,500. SWAP IS ALREADY IN THIS CAR! CLEAN TITLE!
USDM B16A- Bad rod bearing, complete head minus injectors and TB. $600 firm.
Bare B18C1 head. $200
B-16 head complete with Skunk2 Pro series intake. SOLD!!! PENDING EBAY SALE
Gramlight 57c's- 17" gold with like Ventus tires. $1,400 OBO.
Omni Power strut/coilover combo with camber kit. 0 miles scratch free. I believe they are street spring rate. $600 firm.
94 up Integra VIS carbon hatch with glass. Never seen the road. $500 firm.
VIS carbon hood. Still mounted to shipping wood. $300 firm.
Carbon fenders. A little bruised, the way I got them. $150 firm
Carbon spoon mirrors. Never mounted. $100
MORE B-SERIES S ALSO HAVE A B17 head- Ported, polished, JG dual springs, Blox intake, Crower stage 2 cams (the good ones) with STR cam gears. May seperate. Call if interested. Don't have a price right now.
Greddy E-manage with E01 boost controller- Nice with all hardware. $300 firm.
USDM B18C1 block- Bored 0.020, one rod journel needs to be filed and polished and will need pistons and maybe bearings. It was rebuilt 10k ago, ran fine but the crank got nicked when switching out high comp for low comp (wasn't me!). May throw head in with this, but as described $225 firm.
92' Civic Hatch DX-SOLD!!!
Some dirty pics.
Teg setup.
http://i2.photobucket.com/albums/y7/****init/Ross015.jpgHigh compression B18c. $3500 obo.
http://i2.photobucket.com/albums/y7/****init/Ross008.jpg1994 Civic Dx coupe shell. $1000 or with swap $4500.
http://i2.photobucket.com/albums/y7/****init/Ross006.jpgB16. $600 >Have TB
http://i2.photobucket.com/albums/y7/****init/Ross014.jpg -
Someone buy this shit up.
-
What the suck ross.......i need someone to buy my junk show and i mite take your integ. I will call you this week sometime to chat
Oh and bump for some sweet shit....
-
what the heck are you selling all your crap for ross, you mean to tell me i gave up a whole day to work on a teg that you are now selling
-
karter_2_22 wrote:
what the heck are you selling all your crap for ross, you mean to tell me i gave up a whole day to work on a teg that you are now sellingI wouldn't worry about a day buddy, I've got months into some of this!
:icon_shaking2: ALSO HAVE A B17 head- Ported, polished, JG dual springs, Blox intake, Crower stage 2 cams (the good ones) with STR cam gears. May seperate. Call if interested. Don't have a price right now.
Greddy E-manage with E01 boost controller- Nice with all hardware. $300 firm.
USDM B18C1 block- Bored 0.020, one rod journel needs to be filed and polished and will need pistons and maybe bearings. It was rebuilt 10k ago, ran fine but the crank got nicked when switching out high comp for low comp (wasn't me!). May throw head in with this, but as described $225 firm.
STILL MORE!!!
-
lol ross i was jsut giving you crap, ill have to give you a call some night this week
-
Bump for ROSS!
-
reading owns me
-
I'll help ross out here. It has a new hood. Also includes pedal assembly, radiator, and lowering springs.
here is a couple pics.
-
Guys I haven't had much intrest in any of this, I will be taking pics for ebay in the next couple of days. If anyone is serious I can send some pics but hope to move it all but the TEG setup on ebay. NO TRADES SORRY FOR NO PICS BEEN BUSY BUT EVERYONE INTERESTED SHOULD KNOW WHAT A V_tec HEAD LOOKS LIKE and so forth! Also call me I am always around my phone. 701-269-4989
-
Sorry ross but this shit is way to ballin for anyone around here.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login