Big problem....No turbos
-
JN210;170968 wrote:
so how would this "custom" setup work?You'd need everything from a TT ECU, exhuast manifolds, oil feed lines, intercooler with piping etc etc etc...Trust me buddy, your best bet is to just drive it the way that it is, and later on down the road, buy something better...Unless you still want to talk about dropping in an SR20 or maybe, if it fits, an RB26...granted that engine would cost as much as your entire car...
And Z31, it IS a Z31...89 NA Z31...AUTOMATIC if I may add...
-
KA-T_240;170976 wrote:
an RB would probably work.Have you thought about the vg30dett out of a z32?
The Z32 engine is huge compared to the Z31 engine that's in there. There would be so many clearance issues. That would be like me trying to put a 6G72TT in the venge...Just to big. I say RB26 All the way...
-
actually those cars could be had with a RB25 in them in jap land and aussie-land. As far as ding a turbo swap, its alot more work than it seems. you are best off finding a complete car, just sold one in wahp for $300, you missed out big on that one. You need:
front crossmember
motor mounts
driver side exhaust mani
turbo and elbow
downpipe
oil pan/ feed line
charge pipe
ECU
and if you swap to a 5-speed, the trans and a driveshaft
shifter and console
cluth pedal and master cyl
OR
complete rusted out stock Z31 turbo carHonestly it turns out to be alot of work, and your best bet is pulling the motor and assembling everything on it. Also i would not look for a turbo engine swap, as they are 7.8:1 compression, and are absolutely dead off boost. while you have it apart, throw the stock T3 in the trash and pick up a 50 trim or 60 trim, just need the exhaust housing for the stock turbo machined out.
If you are interested in doing the swap, im sure Z31 and I would be happy to do the work for some cash. -
no, thats everything you need to convert your VG30E to a VG30ET. your looking at substantially more to convert to a RB25, just keep dreaming about doing that. like i said, best bet is find a really shitty 84-88 z31 turbo 5 speed, wrecked, rusted so you can see through it, whatever. long as its $500 or less. start stripping parts off of it and get em cleaned up. To swap everything onto your motor your looking at probably 40 hours labor to do it the right way, thats switching to a 5-speed as well. add in the cost of new gaskets, timing belt if you havent done it lately, O2 sensor, clutch etc. if you arent doing it yourself, make sure you have at least $1500 saved up, plus the donor car. If you do it yourself, figure in about $500-$1000 in extra parts. Plus the cost of a new turbo or rebuilding the stock t3/t25.
Gary -
Well that looks like alot of work but im definately wanting it done so im willing to do that, where would be a good place to start lookin for a POS Z31? In other words what are the local junkyards?
*1989 Nissan 300ZX Z31 *
> DelSlow;262050 wrote:
> I like the new JN210 -
JN210;171068 wrote:
Well that looks like alot of work but im definately wanting it done so im willing to do that, where would be a good place to start lookin for a POS Z31? In other words what are the local junkyards?The real question is where are the local junkyards that don't treat you like shit...
-
well, there is a complete turbo automatic sitting in Hazers, but those guys are complete failures at life, bet you couldnt get it for less than $1000, and its worth dick. if you arent already, get an account on http://www.z31performance.com/forum/ and look in the classifieds section for shitty cars. or post up a wanted ad. also keep an eye on ebay there are some local ones on there. You could go to hazers and ask them about the car, but dont sound too interested. its blue and is sitting close to the buildings on the north end of the yard. You might stumble upon one locally as well, i see them from time to time and will look for one.
Gary -
Yeah i could go there and ask about it. Of course i would have to be very clear about it due to the fact they dont even look for it, My brother and i went there and they just totally blew us off so we walked out pissed off, i have yet to see a decent guy who works there. and i have seen a couple Z31's that could be parted out.
*1989 Nissan 300ZX Z31 *
> DelSlow;262050 wrote:
> I like the new JN210 -
you could try www.car-part.com as well.
-
How wild do you want to get with this car, is it going to be daily driver? I would start with the auto to manual swap.http://www.xenonz31.com/Modification/Auto_to_Manual_Swap/auto_to_manual_swap.html The reason is that the N/A auto trans is for gas milage (25 MPG) 130 WHP and the car runs 18 second 1/4mi. with the manual you will run 16.5@83mph in the 1/4 mi. My N/A auto trans started slipping at 180WHP and was slow off the line.
-
There was a 95 in the paper today, maybe worth a try. http://www.in-forum.com/classifieds/index.cfm
Go into transportation and click on parts & engines.
Edit: Click today after selecting parts & engines.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login