dry ice
-
Well, i would be needing it tomorrow. I plan to make some calls.
I actually am not planning something "devious" I am going to do some experiments with the properties of metals when there is a extreme temp change. For example if its pushed one way, if the extreme change can cause the metal to change back to the original position......... Enough with the BS, I am going to be attempting a new PDR method I have been reading on.
-
KA-T_240;200620 wrote:
I actually am not planning something "devious" I am going to do some experiments with the properties of metals when there is a extreme temp change. For example if its pushed one way, if the extreme change can cause the metal to change back to the original position......... Enough with the BS, I am going to be attempting a new PDR method I have been reading on.Yeah keep us posted on this. Sounds like it would work somewhat...
-
I've heard of people using regular ice to get small dents out , especially in the summer after the car has been sitting in the hot sun all day. I'm guessing dry ice would work pretty good, just a little hard to get your hands on some. If you have access to a CO2 fire extenguisher that you or somebody does mind parting with you can make a small amount of your own.
Sterling Archer: Oh my god! You killed a hooker!
Cyril Figgis: Call girl!
Sterling Archer: No Cyril! When they're dead they're just hookers!
-
Dixie Carbonics, that's where we bought it from when we were making dry ice bombs.
-
that method of pdr has been tried many times before....it doesnt work... dont you think people would be doing it if it were easier than massaging the dents out? I'd think so!
-
Well, this is my results. My big dents in my rear 1/4 got a little bit smaller. Don't know if it will pop out again after i put the car down and drive it. 2 others got a bit smaller but still there. In true mythbusters style I will be taking it to the next level today. I have some junk body panels and ill make some large dents and try it.
Also, lots of dry ice to play with!
-
DWeigs;200704 wrote:
If your looking to have some fun.. Put some in a bottle with some water then close it and throw it in a parking lot and wait... Did this at work once, it was fun. But be careful!!Yeah we used to do that all the time when we were younger. Had a few VERY close calls though...one bottle blew up in my hands about a foot from my face.
We filled a 2 liter and put a camera on it to record the explosion, it took forever but when it blew up you could feel it in the house 50 feet away, all the ornaments on the windows were shaking too.
-
When I worked at a grocery store we'd throw them out the dock door. It was lots of fun until the manager caught on...
I never even thought of getting the dent nice and toasty from a heat gun before using the dry ice. project!
Something else that gets VERY cold is compressed CO2. Id be willing to bet that would get plenty cold if a 20 OZ tank were emptied on the panel.
-
me and some friends do this alot in the warmer months, we threw some in a dumpster once so it would echo really loud, and being we were in a baseball field parking lot, we found a baseball. so as one friend stuck his head in the dumpster to see why in the hell the bottle had taken so long to blow, my other friend threw the baseball as hard as he coule at the dumpster making the person with their head in it to think it went off. i swear he shit his pants.
-
uman44;200723 wrote:
When I worked at a grocery store we'd throw them out the dock door. It was lots of fun until the manager caught on...I never even thought of getting the dent nice and toasty from a heat gun before using the dry ice. project!
Something else that gets VERY cold is compressed CO2. Id be willing to bet that would get plenty cold if a 20 OZ tank were emptied on the panel.
The canisters that of compressed air that are used to clean off keyboards are compressed C02. Hold them upside down and that's what comes out...super cold.
-
I was thinking much larger. I fill CO2 at Scheels and when You dump a really full bottle the cans get extremely cold. You can't even touch them or you'll get frost bite... so I bet if you could figure out a way to unleash an full tank onto the heated dent you'd get some pretty extreme temp changes which is what you want.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login