Time for new parts for the TH-400
-
95accord;232076 wrote:
i have a 20lb sledge at work lolDon't need it, I found my 18 lb'r. Got it apart again, only thing that is hurt is the reverse band clutch. For some reason it isn't applying hard enough.
I guess I didn't mention but I still had T-brake issues after re-build. I took it out Monday night with 20+ lbs. for 20 minutes. 1-2-3 are all good. Beat on the t-brake and some fast backing up, finally got both to fail, no reverse or transbrake.
-
Tranny back in Friday night. Cruised around Saturday for a couple hours. Seems to work good. The T-brake works good too.
Now the bad news again, was playing with the 2-step (just wired it up) and started playing around with it. Anything under 3500 rpm's car sounds like it wants to fall apart. Tried 4000 4500 5000. 5000 rpm's boost was climbing then I blew the cooler line off. Rolling white smoke enough to fill the shop. Tonight I pulled the front clip, bumper support, headlight assy. and intercooler to replace all lines to cooler...
This is wayyyyy tooo much fun..................
ps. don't use pushlock hose for tranny lines with a brake, they don't like a lot of heat apparently. Teflon line braided next..
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login