Paint?!?!?!?!
-
ok, here is what i found out on ht also. here is the part of the convo.
SpeedingHatch (9:59 PM 1/22/2005): i used a quart of rustoleum flat black paint and a quart of paint thinner. I then mixed them together, and loaded that into my paint gun. Then went to town. In the end, I used pretty much all of it.
What is the point of mixing paint thinner with it?
-
harwood39 wrote:
ok, here is what i found out on ht also. here is the part of the convo.SpeedingHatch (9:59 PM 1/22/2005): i used a quart of rustoleum flat black paint and a quart of paint thinner. I then mixed them together, and loaded that into my paint gun. Then went to town. In the end, I used pretty much all of it.
What is the point of mixing paint thinner with it?
if i remeber correct the thinner is used to help the paint sreapd more even and not leaving lumps and bumps in ur paint job -
if you dont add thinner to rustoleum paint it will not make it through the gun unless it is set for a metalic paint, which wouldnt flow-out as good and the coats would go on too thick, so in short he added thinner to get the paint into a sprayable viscosity
-
karter_2_22 wrote:
if you dont add thinner to rustoleum paint it will not make it through the gun unless it is set for a metalic paint, which wouldnt flow-out as good and the coats would go on too thick, so in short he added thinner to get the paint into a sprayable viscosityyou are correct on this. i asked him and he stated that just like you said. I do have a nice paint sprayer so once it warms up and i get it back together i will prolly use this idea instead of spraypaint.
-
harwood39 wrote:
you are correct on this. i asked him and he stated that just like you said. I do have a nice paint sprayer so once it warms up and i get it back together i will prolly use this idea instead of spraypaint.
Good idea! Could you loan me your spray gun this spring, if I pay you a little $$? -
harwood39 wrote:
I will take oyu up on the offer to use your shop and you help me.
If you want another guy to help, i'll offer my services. -
92TSIpos wrote:
you suck eric, you cant paint. You can do what everyone else does and stand around and look stupid.
i can get tools and keep the fire going
.and i can try to help damn it -
I'll offer my hand as well. I rattle canned the interior on the audi and i've done a lot of other stuff as well, but you know that. I could help with the other stuff as well. But i will help or just B.S. with you, give me a holla when it is gonna happen.
-
harwood39 wrote:
How long can the car be there? I want to do my wire tuck, install my header, attemped to install my guages, install my MSD cap and coil, and of coarse paint.Is that possible to do at the shop?
Well if you dont care if it stays outside, then it can stay there as long as you want. The paint will dry in about two hours so no big deal. We have alot of tools out there so we shouldnt have a problem doing your "to do list". Im going out there friday so if you want to come along and bring the civic ur more than welcome.
-
[email protected] wrote:
I'll offer my hand as well. I rattle canned the interior on the audi and i've done a lot of other stuff as well, but you know that. I could help with the other stuff as well. But i will help or just B.S. with you, give me a holla when it is gonna happen.You can come along to. I like meeting new ppl.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login