New project
-
Vid. is uploading now.
-
-
i dont remember if you said before, but are running some sort of innercooler, if so is it air-air, air-water, or meth?
oh and your right, that alt. barely fits in there..lol
-
XJHEAD;277167 wrote:
A huge A/A came with the car. 6" deep.
ahh i see. thats awesome, along with the rest of the car. i hope someday i have the to will power build a car of this caliber, someday.
-
Saw the car in person this weekend. It's definitely going to be a beast.
-
-
It's getting closer. Only a few more things left. Need to finish a few small wiring jobs behing the dash, finish plumbing the AMS-1000, reinstall all dash panels, reinstall interior, set-up suspension and get an alignment done.
I got a lot of misc. stuff done this weekend. I re-located the tranny cooler from the back to the front and installed a cooling fan on it. Got all the fuel system done. Had the fittings welded in for the blow-off valve and O2 sensor put in. Fabricated new brackets for the shifter cable to work with this shifter. Cleaned up some more wiring.
I took a look at where that 40 lbs. is at. I think it is way too much work for what it is. It would be a lot of cutting, looks like a job maybe for next winter.I am going to try to get it on the road this week to verify the tune. I don't think too much has really changed. If all goes well, I may try to get some launches in this weekend. If launches go well and datalogs look good I may try an attempt at a full pass.
-
XJHEAD;278118 wrote:
It's getting closer. Only a few more things left. Need to finish a few small wiring jobs behing the dash, finish plumbing the AMS-1000, reinstall all dash panels, reinstall interior, set-up suspension and get an alignment done.
I got a lot of misc. stuff done this weekend. I re-located the tranny cooler from the back to the front and installed a cooling fan on it. Got all the fuel system done. Had the fittings welded in for the blow-off valve and O2 sensor put in. Fabricated new brackets for the shifter cable to work with this shifter. Cleaned up some more wiring.
I took a look at where that 40 lbs. is at. I think it is way too much work for what it is. It would be a lot of cutting, looks like a job maybe for next winter.I am going to try to get it on the road this week to verify the tune. I don't think too much has really changed. If all goes well, I may try to get some launches in this weekend. If launches go well and datalogs look good I may try an attempt at a full pass.
keep up the good work! this thing is bad ass, i would love to see it. So what is all involved in removing this mysterious 40lbs?
-
beachbum_jon;278222 wrote:
keep up the good work! this thing is bad ass, i would love to see it. So what is all involved in removing this mysterious 40lbs?Inside the roof. Pull out all roof reinforcing. I guess some guys cut the roof off first to do it.
Not quite as light as I was hoping for. It is still 800 lbs.
-
XJHEAD;278464 wrote:
Inside the roof. Pull out all roof reinforcing. I guess some guys cut the roof off first to do it.Not quite as light as I was hoping for. It is still 800 lbs.
800 lbs means, what, low 8s now all other things equal?
That's going to be a hell of an upgrade.
Still RS/U legal?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login