How much Rice?

[Slowica]

If it has anything less then 8 cylinders most likely a 12.

[63vette]

Slowica;294029 wrote:
If it has anything less then 8 cylinders most likely a 12.
I can hardly fit a small block it there without a shoehorn. A V-12???? you gotta be shittin me. Maybe if I sat between the rear tires!

[KA-T_240]

Hey was saying that if it has anything less then 8 cylinders, it is a 12(in your 1-10 scale)

[DaveH]

Needs a PT114 sticking out of the hood. Otherwise it's good to go.

:icon_cheers:

[63vette]

KA-T_240;294033 wrote:
Hey was saying that if it has anything less then 8 cylinders, it is a 12(in your 1-10 scale)
Reading comprehension..... I fail.

Its the least ricey front I could find.

[Sven]

All depends on what's going under the hood...If it looks fast, damn thing better be fast. I have confidence that you shall represent properly, though.

[funky_monkey58]

Looks good.

Please keep in mind during your build that if you use a mandrel bender you won't need much power to go fast.

[zbrown]

I am not a cowl guy, but if the clearance is needed then it is needed

[DelSlow]

Looks good.

[24valvenotak]

is it one piece? looks bad ass but that hood screams billy ray cyrus not techno

[99civic]

10..... hope u are starting to grow a mullet to drive this. but you are buying the paint from me so ill give ya a 1

[DrifterExtreme]

Yeah this isn't a 80's iroc z. Idk if it is just me but a smoother cowl would have matched the car better. but then again i use pie cuts.....:icon_rr:

[63vette]

I had to have at least 3" more clearance, so a smaller scoop would not have worked. The scoop and hood are both steel and bonded with fusor. The front is fiberglass bonded and bolted to the fenders with Maxim. I will probably eventually pop a mold off and make a light weight removable front.

[GhettoFabulousCRX]

I say an 8 for ricey-ness. Molded bumpers never look good. I'm sure the cowl is needed though.

[blackcherryTSi]

i think it looks pretty sweet.... definently a 2..... well after all the work that will be done cleaning off at the paint/sanding dust thats all over everything in your garage you deserve a 1! haha i like looking at other peoples builds

[Grr]

do like, you should invite me up sometime so i can learn some of this shit

[63vette]

blackcherryTSi;294085 wrote:
i think it looks pretty sweet.... definently a 2..... well after all the work that will be done cleaning off at the paint/sanding dust thats all over everything in your garage you deserve a 1! haha i like looking at other peoples builds
Dont get me started.... I moved a pile of stuff out of the garage today and started cleaning up. I pressure wash the garage so its usually just a two day project to get ready to paint. I am sure sick of blocking and dealing with all the dust though.

[63vette]

Grr;294086 wrote:
do like, you should invite me up sometime so i can learn some of this shit

Any time. Bring beer and work clothes.

[63vette]

99civic;294054 wrote:
10..... hope u are starting to grow a mullet to drive this. but you are buying the paint from me so ill give ya a 1

Buying paint? That wasnt part of the deal.

[DrifterExtreme]

63vette;294067 wrote:
I had to have at least 3" more clearance, so a smaller scoop would not have worked. The scoop and hood are both steel and bonded with fusor. The front is fiberglass bonded and bolted to the fenders with Maxim. I will probably eventually pop a mold off and make a light weight removable front.

No i understand needing the room, was only mentioning the smooth/rounded edges on those cowls.

But it really looks good.