Sfi 25.5

[KA-T_240]

Where does the bar that goes towards the transmission tunnel go to?

[funky_monkey58]

You are going to need a lot more duct tape for that to hold together.

[DaveH]

KA-T_240;300172 wrote:
Where does the bar that goes towards the transmission tunnel go to?

Tee's into the subframe connector.

[DrifterExtreme]

KA-T_240;300172 wrote:

Where does the bar that goes towards the transmission tunnel go to?

http://www.boostwerx.com/blurr/25.5/25.5-02.JPG

Look at this picture, you can see where the bar connects.

[DaveH]

funky_monkey58;300174 wrote:
You are going to need a lot more duct tape for that to hold together.

Or JBWeld

:icon_rr:

[XJHEAD]

I need some practice with the tig..

[capitlj]

Should keep you safe when you hit 200???

[KA-T_240]

XJHEAD;300178 wrote:
I need some practice with the tig..

tig is worthless....

I heard wally world has those sweet 110 welders!!!! You don't even need to use gas with them...:icon_geek:

[DaveH]

XJHEAD;300178 wrote:
I need some practice with the tig..

Bring it. I need some shit tacked together so it quits falling apart as I work on other stuff. Duct tape ain't cutting it.

:bom:

[funky_monkey58]

DaveH;300217 wrote:
Bring it. I need some shit tacked together so it quits falling apart as I work on other stuff. Duct tape ain't cutting it.

:bom:

That is only because you are clearly not using enough...

[kylush]

duct tape>welds

[DaveH]

More pipes in, not too much more duct tape. Getting a couple bends made tomorrow, then maybe get at tack welding some stuff in.

[weshole]

looks uncomfortable to get in and out of. And, it's not even done.

[DaveH]

Yep, it gets worse as I add the funnycar cage. I plan on adding removable joints in my hips and knees to make it easier to get in and out. :icon_albino:

weshole;300567 wrote:
looks uncomfortable to get in and out of. And, it's not even done.

[XJHEAD]

DaveH;300572 wrote:
Yep, it gets worse as I add the funnycar cage. I plan on adding removable joints in my hips and knees to make it easier to get in and out. :icon_albino:

Hell, at your age I figured you already had more bolt-on parts than your car does.

[DaveH]

No bolt ons... yet.

XJHEAD;300573 wrote:
Hell, at your age I figured you already had more bolt-on parts than your car does.

[DaveH]

Made more progress, pulled the oem steering column out and getting ready for an aftermarket column with removable steering wheel. Practiced a bit with the tig and got one side tacked in, a couple of my tack welds don't even look like complete poo. Got part of the funny car cage fitted.

[63vette]

DaveH;301044 wrote:
Made more progress, pulled the oem steering column out and getting ready for an aftermarket column with removable steering wheel. Practiced a bit with the tig and got one side tacked in, a couple of my tack welds don't even look like complete poo. Got part of the funny car cage fitted.

If you can tack it you can weld it. Fire that welder up and finish it!
Good move with the removable wheel, its going to help you shoehorn in a lot. If you dont want your wheel to wobble get a MW hub.

[DaveH]

Eh, I'll let someone that knows what they are doing finish all the welding. I practiced enough that I feel ok tacking things together but thats it. I'd have to practice a lot more before I felt comfortable doing the welding.

The hub I got is competition engineering, hopefully it's decent.

63vette;301050 wrote:
If you can tack it you can weld it. Fire that welder up and finish it!
Good move with the removable wheel, its going to help you shoehorn in a lot. If you dont want your wheel to wobble get a MW hub.

[63vette]

DaveH;301053 wrote:
The hub I got is competition engineering, hopefully it's decent.

That one is decent not too wobbly. The loose ones are annoying as hell.