CRX...meet ET Kreations and Fargostreet. Play Nice.
-
btleier wrote:
well... the reason it's cheaper is because they don't have to spend their time pulling them off. it makes sense.Exactly. If he quoted you that little, he's going to paint it on the car...he's labor is the most expensive of any shop I visited. Great work, absolutely...but he's quote for my car was much MUCH more than what ET quoted me.
-
NO ET would give me a lil deal if I brought them in...But still quoted 1000.00 to do the same work as NZ But NZ will do everything for 350.00
Bumper cover has to come off, its pushed in a lil.
-
seanjohn wrote:
Wow....sounds pretty off to me for NZ to quote under anyone. I'm not even going to say what they quoted me for this job....lets just say "a lot".Im gonna have to disagree w/ you there, he's always very reasonable @ $44/hr. Everything i've had done by him i've been happy w/. I've sent a lot of people over to him and no one has ever seemed to complain about the price or the quality. For all the paint, body, and upholstry i've had done by him it hasn't even totalled up to $2000.
-
I'll have agree and disagree with Tufte here. Tufte sent Megan over to NZ to get her body work done on her CRX. NZ wanted to charge her $5600 to mold in the body kit, take care of a couple little rust spots, and re-paint the car the original color. After looking at the quote they gave her I noticed little things like "4 hours-check driver fender for rust" "4 hours-check pass. fender for rust" at NZ's labor rate it would cost $352 just to check the fenders for rust (which, by the way, doesn't take 8 hours unless you are blind or maybe trying to rip off a girl) while brand new "Certifit" fenders are $100 each. Another thing that I noticed on the quote was "30 hours-mold sideskirts to body" Hell, give me some fiberglass, and a can of bondo and I could do it in under 30 hours and for much less than $1320.
While I do agree with Tufte that NZ does excellent work, I got the feeling that they were trying to "rip off some dumb chick" so we decided to keep looking.
Megan is now getting her body work done at ET. I am not going to get into specifics but lets just say ET is doing MUCH more work than NZ for a better price.
Just my .02
-
NZ customs has done good work but tries to rip of people that he thinks don't know anything. When i was in there with sean (white del sol) to look at his car after he had painted it. He painted his radiator and muffler white, and thought that it didn't matter at all and said that I was an idiot for bringing it up. so his work is good but his attatude is shitty.
-
This post is deleted!
-
darkelvis wrote:
I'll have agree and disagree with Tufte here. Tufte sent Megan over to NZ to get her body work done on her CRX. NZ wanted to charge her $5600 to mold in the body kit, take care of a couple little rust spots, and re-paint the car the original color. After looking at the quote they gave her I noticed little things like "4 hours-check driver fender for rust" "4 hours-check pass. fender for rust" at NZ's labor rate it would cost $352 just to check the fenders for rust (which, by the way, doesn't take 8 hours unless you are blind or maybe trying to rip off a girl) while brand new "Certifit" fenders are $100 each. Another thing that I noticed on the quote was "30 hours-mold sideskirts to body" Hell, give me some fiberglass, and a can of bondo and I could do it in under 30 hours and for much less than $1320.While I do agree with Tufte that NZ does excellent work, I got the feeling that they were trying to "rip off some dumb chick" so we decided to keep looking.
Megan is now getting her body work done at ET. I am not going to get into specifics but lets just say ET is doing MUCH more work than NZ for a better price.
Just my .02
Doesn't she has a Wings West kit? If i recall she does and molding urethane involves no fiberglass, they usually a bonding/molding agent called durabond which is extremly expensive but really the only way to do urethane right. I have a couple buddies who have had urethane molding done and its turns out a lot nicer and stronger then fiberglass.
I guess we must just get a better rate then cuz i had my CF hood, CF trunk lid, front bumper, side skirts, and rear lip all painted and installed for $960 and the hood/trunk lid were painted on the bottom side as well. Kevin had the whole front clip of his 2G painted/installed for under $400, and now Hayley's CF hood painted and bumper repaired and painted for $325.
-
PSI2HI wrote:
Im gonna have to disagree w/ you there, he's always very reasonable @ $44/hr. Everything i've had done by him i've been happy w/. I've sent a lot of people over to him and no one has ever seemed to complain about the price or the quality. For all the paint, body, and upholstry i've had done by him it hasn't even totalled up to $2000.I don't want this to turn into an argument about NZ customz work, because I don't think ANYONE will deny that they do great work, without a doubt. HOWEVER, in my particular case NZ quoted me 'considerably' higher than ET did. If you had a larger budget, it might not be a big deal, but in my case it was. To be completely honest, I think that he quotes a little higher on certain cars (particularly some imports) because he maybe doesn't want to do the work as much...which is 'completely' understandable (I'd do the same thing). There was more than just price that swayed my decision. ET Kreations were straight up cool guys to deal with, the type of people that I want to have my business....plain and simple. Can ET Kreations produce the type of work that NZ Customs can...I can't say for sure. But one thing that is for certain, is that the reason for this thread is to provide an answer to that, a couple weeks will tell, and you can all decide for yourself.
-
Not trying to take anything away from them as they do amazing aitr brushing, as far as the rest of the paint and body work i cant say as i haven't seen anything done other than air brushing. I just found it odd you were quoted so high to do your car when i had my hatch quoted @ $2500 to repair rust, take the car down to metal and respray the whole thing top to bottom, engine bay, jams, and the cage.
Keep us posted w/ the pics looking fwd to seeing the finished project. Color change, or same color?
-
Quite possible that NZ didn't want to do your car (and/or Megans for that matter) and quoted high because of it. It happens all the time in every industry. I've not talked w/ NZ or ET about any pricing but from what I can tell they both do good work. No need for a "My shop is better...." argument, isn't it possible that they are both VERY good at what they do?
-
I really wanted to take the mp3 to ET but at over 650.oo higher quote that would be stupid, plus he told me they are busy ... NZ said hed get it done thursday, friday and could pick it up on monday after it dried.
Plus NZ was a lil more professional while quoting me, I;ll bring my gold civic in to ET and NZ to get a quote on painting sides of hood, bumper, fenders..Has anyone on the site had a car completely painted by either NZ or ET?
-
FINALLY! Updates!
Here is a close up shot of the bumper, Tim ditched the nasty left over moulding crap in the bumper, platic welded the necessaries back together, and is going to fill/prime everything smoohter than a babies ass.
Oh it's so nice!
What they did here is scraped all the rust out and filled it with bondo from
AutoZone
I dunno how that hell that got in there?
Their work speaks for itself.
-
looks good
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login