rock my ride contest
-
Cost is $3300 + shipping....
The JDM front end for the 4 door Si isn't that much money. Reason being is that the CTR from Japan has the same front end as the Acura CSX in Canada. So if you source out the fenders, hood, front bumper, fog lights, headlights and cha ching you have the "JDM" front end.
"Canadian CSX"
http://driving.canada.com/07photo/acura/csx4dr-premiumnavi.jpgThe list of parts are (taken from a guy that did the conversion):
"1. HOOD
a) hood insulator (it comes with it's own clips)
b) L + R headlight seals ... those are rubber pieces that attatch to the left and right corners of the hood where it meets the headlight
c) ur warning lables that go under the hood-
L + R FENDERS
a) L + R bumper brackets ... those attatch to the fenders. You need those because this is what the bumper attatches to at the back corner of the headlights/ front corner of the fenders... you will need to reuse the 1 screw on each side that's on the stock bumper brackets (or u can get new ones) -
BUMPER
-
GRILL ... mugen or stock jdm civic / csx crill ... if using csx / jdm grill u'll need a few extra mounting clips for where it attatched to the top of the bumper... i think 3 but i'm not soo sure since i'm using a mugen grill.
-
RADIATOR COVER/COWL
a) extra mounting clips as this one uses 3 extra clips ... part # 91505-S9A-003 -
L + R HEADLIGHTS
a) L + R headlight brackets ... those are needed to attatch the headlights to the frame as well as to attatch the bumper to the bottom of the headlights.
B) 4 extra bulbs ... can't remember the bulb number but u'll want those bulbs + sockets ... 2 of these bulbs are ur park lights so u may want those or else u won't have park lights ... the other 2 are city lights which just look cool when ur headlights are on ... u have to wire them into ur harness accordingly.
i) the park ones get wired into ur turn signals via 2 wires... so they light up when u stock park lights are on but they don't blink ... they are basically side markers.
ii) the city lights get wired into ur low beam ... -
FOG LIGHTS
you will have to reuse ur stock screws/bolts. they are all the same.
all 10mm bolts with the exception + 2 philips screws for the bumper brackets + 2 philips screws that attatch the bumper at the corners
side item ... u'd have to remove ur wipers and u need a 17mm socket for thatThat's everything you will need for a perfect conversion without any missing pieces and a perfect fit ... no modifications of any kind. 100% bolt/snap on."
Congrats to the RX8 owner, and I assure you, this thing is gonna be amazing when it is done.... Less than 2 weeks and counting until the unveiling!
-
-
FG2;181983 wrote:
Cost is $3300 + shipping....The JDM front end for the 4 door Si isn't that much money. Reason being is that the CTR from Japan has the same front end as the Acura CSX in Canada. So if you source out the fenders, hood, front bumper, fog lights, headlights and cha ching you have the "JDM" front end.
"Canadian CSX"
http://driving.canada.com/07photo/acura/csx4dr-premiumnavi.jpgThe list of parts are (taken from a guy that did the conversion):
"1. HOOD
a) hood insulator (it comes with it's own clips)
b) L + R headlight seals ... those are rubber pieces that attatch to the left and right corners of the hood where it meets the headlight
c) ur warning lables that go under the hood-
L + R FENDERS
a) L + R bumper brackets ... those attatch to the fenders. You need those because this is what the bumper attatches to at the back corner of the headlights/ front corner of the fenders... you will need to reuse the 1 screw on each side that's on the stock bumper brackets (or u can get new ones) -
BUMPER
-
GRILL ... mugen or stock jdm civic / csx crill ... if using csx / jdm grill u'll need a few extra mounting clips for where it attatched to the top of the bumper... i think 3 but i'm not soo sure since i'm using a mugen grill.
-
RADIATOR COVER/COWL
a) extra mounting clips as this one uses 3 extra clips ... part # 91505-S9A-003 -
L + R HEADLIGHTS
a) L + R headlight brackets ... those are needed to attatch the headlights to the frame as well as to attatch the bumper to the bottom of the headlights.
B) 4 extra bulbs ... can't remember the bulb number but u'll want those bulbs + sockets ... 2 of these bulbs are ur park lights so u may want those or else u won't have park lights ... the other 2 are city lights which just look cool when ur headlights are on ... u have to wire them into ur harness accordingly.
i) the park ones get wired into ur turn signals via 2 wires... so they light up when u stock park lights are on but they don't blink ... they are basically side markers.
ii) the city lights get wired into ur low beam ... -
FOG LIGHTS
you will have to reuse ur stock screws/bolts. they are all the same.
all 10mm bolts with the exception + 2 philips screws for the bumper brackets + 2 philips screws that attatch the bumper at the corners
side item ... u'd have to remove ur wipers and u need a 17mm socket for thatThat's everything you will need for a perfect conversion without any missing pieces and a perfect fit ... no modifications of any kind. 100% bolt/snap on."
Congrats to the RX8 owner, and I assure you, this thing is gonna be amazing when it is done.... Less than 2 weeks and counting until the unveiling!
Full JDM conversion to me means also the motor, interior, rest of the body panels, etc....otherwise it's a JDM front end conversion...i'm guessing that's not even RHD either
-
-
Ok, the front and rear end conversion would cost around 10k with 5k left over you could get a good start on the interior.
http://www.8thcivic.com/forums/showthread.php?t=50692
Re: Front bumper
Quote:
Originally Posted by Gundar1
Hi, Where did you order your front and rear bumper from, and if you dont mind, how much was it?thanks, adam
Hi, I didn't order just the front and rear bumper alone..I purchased the complete jdm front end conversion and the rear end conversion, and i added the Mugen kit. it was abotu $8,000 total in parts. thats everything
Nasif
plus paint
-
who cares?
-
Gundar1;182014 wrote:
Ok, the front and rear end conversion would cost around 10k with 5k left over you could get a good start on the interior.http://www.8thcivic.com/forums/showthread.php?t=50692
Re: Front bumper
Quote:
Originally Posted by Gundar1
Hi, Where did you order your front and rear bumper from, and if you dont mind, how much was it?thanks, adam
Hi, I didn't order just the front and rear bumper alone..I purchased the complete jdm front end conversion and the rear end conversion, and i added the Mugen kit. it was abotu $8,000 total in parts. thats everything
Nasif
plus paint
Kid stfu ur dumb....like i said before still not a "full jdm conversion"
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login