Project: putting a real motor in a RX-7

[94NDTA]

Who's building the tranny?

[Grr]

i dont think this trans will have alot of problems holding. sure it will need it eventually, but with zacs 2600lbs, and 4.11 gears, there shouldnt be much stress on it. maybe this winter it will get a mild stall and a shift kit, new clutches, but thats pretty much it.
As a matter of fact, BMR Fabrication took a bone stock 4l60 in a 04 GTO down to a 10.2@130 before it started slipping, in a car with a 3900lb raceweight. So 10.0s in a 2600lb car should be a cake walk

[zbrown]

wow good work you two

man with the intake mani and valve covers the color of the car that is gonna look sick....... i

[zbrown]

oh and using the new edelbrock cast intake elbows that just came out instead of a sheet metal one

really low profile, clears a stock hood..... like this, but powder coated black

[94NDTA]

Grr;215732 wrote:
i dont think this trans will have alot of problems holding. sure it will need it eventually, but with zacs 2600lbs, and 4.11 gears, there shouldnt be much stress on it. maybe this winter it will get a mild stall and a shift kit, new clutches, but thats pretty much it.
As a matter of fact, BMR Fabrication took a bone stock 4l60 in a 04 GTO down to a 10.2@130 before it started slipping, in a car with a 3900lb raceweight. So 10.0s in a 2600lb car should be a cake walk

I see. Good luck with that. It is kind of hit or miss, some people do well, but most end up needing a rebuild sooner than they would like.

Also, isn't it technically a 4L65E?

[z31]

Did some painting today. :icon_santa:

[DrifterExtreme]

so zac when is the turbo going on?

[KA-T_240]

z31;216304 wrote:
Did some painting today. :icon_santa:

..... nice rattle can job!

[z31]

KA-T_240;216307 wrote:
..... nice rattle can job!
I placed those rattle cans on the table as a decoy. I got u Faber.:icon_cheers:

[zbrown]

DrifterExtreme;216306 wrote:
so zac when is the turbo going on?

when ever you want to do the hotside sexy like

getting a different rad and putting it way up front.....

so we will have like 1 foot between the engine and rad to stick something

[z31]

Current pictures

[3_Series]

Nice work!

[KA-T_240]

you are missing some bolts and such!

[z31]

3_Series;216504 wrote:
Nice work!
Thank You :icon_cheers:

I have painted so many motors for zac, he gets a discount.

[z31]

KA-T_240;216509 wrote:
you are missing some bolts and such!

So Faber, what else do you see? :icon_bigsmurf:

[KA-T_240]

some sweet drywall mud. You can use that as body filler rigth

All I know is that somebody needs to take pics of the motor in the car in like a week......... cough cough zac cough.

[zbrown]

Well a whole bunch of new sexy parts have shown up.... i just have been to busy to make any real progress

any way the harness is completely reworked and done.... just needs to be loomed once pulled to the correct length

So some of the parts that have shown up

New Motron 60# injectors
New Edelbrock TB elbow powder coated black
all my plumbing supplies
New C6 vette front pulley
New C6 manifolds
New sexy Meziere water pump

anyway just some shots of the stuff i stuck on there tonight

Main thing i need to purchase is HP tuners and some little stuff and it should be running..... fingers crossed LOL

[weshole]

Fukn sexy!!!

[z31]

:icon_cheers: Show car material :icon_bigsmurf:

[jdm-az-yo]

i think i just made a mess in my pants