my winter project
-
grr,
I am not a huge fan of the painted look. id rather get it polished.zbrown,
From what I am hearing that bolt is a bitch. and I am trying to be optimistic, but I will check all the specs on the springs and the seals.mistercmk,
if I cant get it off then I might have to take you up on that offer.rotaryhaters,
NO, I AM NOT GOING V8. thanks for your concern though. I know you are all looking out for my best interest.
[SIGPIC][/SIGPIC]
12.645@118mph 12.6psi
-
here are some more pics. Everything looks ok except the coolant seals. The outer seals on all the plates are warped (expected) and the inner seal on the front rotor. I also noticed that there was coolant in the front rotor as well as broken corner seal.
I also took the oil control o-rings out of the rotors and fortunatly they look good. they still hold a tight seal against the rings. so By the looks of it, all i need is one corner seal, coolant seals and the dowel seals.
All the tolerances on the springs are within spec.
zac, what else do you think I should look at or concider?
[SIGPIC][/SIGPIC]
12.645@118mph 12.6psi
-
looks like you got lucky
I am surprised you lucked out breaking only one corner seal, and that an apex didn't let go, since i thought you were using OEM 2 pc, correct??
both halves look to be there from the corner seal.... so nothing went through the combustion chamber...... consider your rotors, housings, and turbine wheel lucky
(especially on a $$ turbo like that)I'd just make sure to check the irons for flatness if this motor got at all warm on you.
IMO those corner seals are brittle and a POS, I would recommend solid corners with the good springs when put back together
also people are having great luck with RA teflon encapsulated coolant seals.... just a thought
anyway, I am happy you didn't tear up those housings
-
yea, I might be painting instead of polishing. looking at cost and will be much cheaper. Id rather not buy i guess one is limited to what he has in his wallet. Do they make a polished alluminum color paint?
Gary, what kind of paint do you suggest? never painted car parts before.
[SIGPIC][/SIGPIC]
12.645@118mph 12.6psi
-
fdfreak;246472 wrote:
Gary, what kind of paint do you suggest? never painted car parts before.On my stuff every thing has a PPG sealer applied first....
the irons have a PPG single stage black....
and the red is the same paint on the car..... PPG base/clear
you would not believe how tuff all that stuff is...... even right at the exhaust ports after a bunch of antilag the red was like new
BTW the stuff that looks like bumps or whatever on the back rotor housing is just casting flaws, not paint flaws
-
Grr;247687 wrote:
spray paint wasnt what i had in mind when i said paint, but i guess it looks good enoughi know it wasnt what you had in mind, but I i was pinched for time. so I threw 3 coats of primer down, 4 coats of paint and 3 coats of clear. next week I will be up at NDSU putting the engine back together.
[SIGPIC][/SIGPIC]
12.645@118mph 12.6psi
-
:icon_cheers:> zbrown;246493 wrote:
On my stuff every thing has a PPG sealer applied first....
the irons have a PPG single stage black....
and the red is the same paint on the car..... PPG base/clear
you would not believe how tuff all that stuff is...... even right at the exhaust ports after a bunch of antilag the red was like new
BTW the stuff that looks like bumps or whatever on the back rotor housing is just casting flaws, not paint flaws
:icon_salut:YES this is now my screensaver...!!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login