87 rx7 issues
-
I put the 87 rx7 i got back together. It was a fuel pulsation damper that was bad, got a new one. Put it all back together with new seals, gaskets and vacuum lines. Sealed it up really nice. Fired right up and ran perfect for 45 minutes then died for no apparent reason. No start after that. After some screwing around I figured out it was flooded. Cleaned on the cylinders and plugs. Fired up again, ran really rough, could not hold idle. Figured it was just too much fuel in it. Ran it at 2K for a few minutes. Still would not hold idle and had a random miss at low rpm. Ran it about 10 minutes. Noticed it was smoking from the engine, shut her down to see why. Exhaust manifold to the cats were glowing red. Removed cats, 1 pre cat fell apart and was lodged in the other, main cat was half melted. Planned on cat delete anyways. Tried start again, still rough, still miss, still no idle, backfires if you rev it up and let off. Confused as all hell.'
Pulled the intake again, checked everything 3 or 4 times. Pulled egr, it was clogged solid with carbon, so not a stuck open egr. Compression test showed excellent so apex and rotor seals seem good. Plugs looked new, fuel pressure good.
I noticed the 2 sensors on the air control valve for the emissions were broken, but no big deal being emissions.
So I have no idea whats causing it to run so shitty. Going to clean the injectors tomorrow night and put in fresh fuel, since the stuff in the car was a year old.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login