240sx
-
I'm not sure of any....... if you wanna join www.northernanimation.com, it's another local forum, and there are quite a few 240 owners running around on there that could give you advice. either that or join some 240sx forums, and just start researching the crap out of it.
-
I gotta agree w/ blake here...that swap is EASY to come by. If you want to do something really different (for this area of the world) do an RB25 or RB26 swap
-
tjamz wrote:
I gotta agree w/ blake here...that swap is EASY to come by. If you want to do something really different (for this area of the world) do an RB25 or RB26 swapWord!!
-
A '90 240 for $400 and a possibly blown motor is a perfect candidate for a swap. 240s are probably one of the only cars that people sometimes want to find with a blown motor. Anyways, the SR20DET is the most common and the most straightforward swap like btleier said. It is pretty much a direct bolt in with the exception of the A/C and power steering on '89 and '90 models where the stock bracket for the A/C wont work and you'll need a PS line and reservoir from the DOHC engines ('91 +). Check out zilvia.net and 240sxforums.com, they're an excellent source for information. As far as swapping in an RB, keep in mind what your goals would be for the end result cuz the RB engines will throw off the weight distribution which is damn near 50/50. If I were to go the swap route I personally would choose the CA18DET that came in the '89 and '90 models in Japan. Despite having less power stock than the SR, the thing that attracts me to the CA is its rock solid bottom end (iron block and forged rods if i remember right) and better head design (it doesn't have rocker arms) and will rev better and higher than the SR. Although they are an older engine, they're relatively cheap compared to the SR's which are rising in price, and now you could probably get a CA and do a rebuild or a build for close to the price of some SR's. And SR's have better aftermarket support than the CA but the CA's support is growing and with a little effort can become bad ass. But that's just for my tastes, so if you wanted to go the route where the highest possible hp is going to be achieved go with the SR or an RB. Bottom line is 240s rock dude, go buy it.
'91 Nissan 240sx Fastback Superhicas
My cardomain site
-
Hmm. I know of an SR20DET in town, HKS top mount equal length T4 manifold for an SR20DET and a couple other misc parts that are all local.
-
97jeep wrote:
i found complete motor tranny stuff for under 2k plus shipping
only downside to car is that its an auto, which sucks, still desiding if its worth it to do a 5spd conversion, i know they major pain
It's so worth it, do it.With the engine already out you mine as well.
-
sr20det, manual or auto, turbo all accesories, computers and harness, pretty much everything but hose, which can be reused and and intercooler, or any upgrades you would like to add, its suppost to also come with step by step instructions for the whole swap
-
The local SR20DET isn't going to be for your average person in town looking to do a swap.
It's torn down ready to be sleeved, built and assembled. It's a rather large project if you're looking to get into one that deep. -
Oh im looking for a large project... have a lot of time on my hands right now and was planning on buying a burnt up one to rebuild anyways.
As far as an intercooler goes talk to nick or kevin at SLS they can hook you up with a nice FMIC and piping to boot.
-
More info on SR20 would be appreciated. I found a great shell in good condition except some minor front end damge and some hail damage that doesnt seem to bad. Guy wants $500 it just needs motor, new hood ( this isnt that bad and just has a small crease in it. ), front bumper, and hopefully the hail damage isnt really bad.
So if I go pick this up im going to be needing an engine soon. And since the SR20 is local id like to pick it up and rebuild it and drop it in. So get me that info!
-
Flowcus wrote:
More info on SR20 would be appreciated. I found a great shell in good condition except some minor front end damge and some hail damage that doesnt seem to bad. Guy wants $500 it just needs motor, new hood ( this isnt that bad and just has a small crease in it. ), front bumper, and hopefully the hail damage isnt really bad.So if I go pick this up im going to be needing an engine soon. And since the SR20 is local id like to pick it up and rebuild it and drop it in. So get me that info!
if you would do an sr20, you need to do a silvia bumper/hood/side skirts conversion anyways, true JDM $h!tJohn, do this! you mom will gladly pay for it and your dad will help you do it. GO JOHN!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login