CEL after d16y8 motor swap... can't pull a code...
-
the light is on the whole time the car is running.... after the 5-10 second delay. it just clears itself each time. if the motor is not running the cel is gone. you know how usually you can just pull the cel by having the key in the on position. I don't know if I'm making sense here.
-
btleier wrote:
the light is on the whole time the car is running.... after the 5-10 second delay. it just clears itself each time. if the motor is not running the cel is gone. you know how usually you can just pull the cel by having the key in the on position. I don't know if I'm making sense here.You cant just turn the key and pull the code, you need jump the wires togethjer to put it in limp mode. I put a toggle switch for those 2 wires right above the ECU, just flip the switch and the light will stay on solid then flash the codes.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login