240sx pics

[KA-T_240]

ya my dad is awsome, itll be turbo by the time MHS is out or ill take some more time and do some awsome wiring and that well take a while, remove all the unneed plugs and sensors on body harness and the wiring harness.

[KA-T_240]

Here a look off some of the stuff coming to my car soon
:icon_bounce:

AMS GT32. developed for the KA my AMS

Boostdesigns Mani and Downpipe.

Fuel rail well get some 75# injectors

For Wes and other wondering the color in the engine bay is 06 Chrystler Inferno Red Crystal Pearl Coat, but it doesnt have the pearl did want to spend the money for the pearl added to paint for the enginebay, but there is extra clear coat. the cost differance added a digit on to the price per quart

[STiSchucky]

97jeep wrote:
ya my dad is awsome, itll be turbo by the time MHS is out or ill take some more time and do some awsome wiring and that well take a while, remove all the unneed plugs and sensors on body harness and the wiring harness.
yea youre only 2 months behind so far

[KA-T_240]

ya i know.... had some problems the heads been off 5 times trying to fix an oil leak and final got that done, but done alot off stuff i wasnt planning on 2 and spent way too much time tring to make my speedo work all the time.

and then a i bought a car and fixed it to pay for more/better parts, i was going to do a getto/budget setup with afc and stuff and decided screw that, ill just do it once

[BlueSRT0483]

loving the color, very clean engine bay and engine..

[nuckinfuts]

STiSchucky wrote:
yea youre only 2 months behind so far
hahaha

[Phats]

nice, Get that shit together john..........in time for motor magic?

[KA-T_240]

hehehe motor magic, well find out wont we. i somewhat started on it today, cut extra wires, removed fenderwells, removed stuff to get to ecu, do everything i can do and keep it driveable for aslongs as possible and then have a frenzy putting it together... probably tearing apart this weekend to start on IC pipes and fix the DP. and get it welded and stuff well i do the rest off it

[Phats]

by chance, is it aluminum intercooler piping? Cause i got to find somebody to weld it together for me, cheap.....maybe we can have a "intercooler pipe welding orgy"

[Phats]

wait, that sounded gay..................

[Joel]

Phats wrote:
wait, that sounded gay..................
X5........

[KA-T_240]

hey im doing stainless(from magnaflow), just buying though dads shop. debating on mig welding it my self or just tack welding every thing and get it tig welded someplace in town, im going to screww around with some spare stainless this weekend and see how the welds turn out. when do u think ull be ready for it? if u can get your car down here

[Phats]

umm, turbinehousing should be here monday, tuesday ish...if all goes well the following weekend

[KA-T_240]

K, if u can find out what you need for pipes ill get you a price for it. i have no clue what is needed for pipes on an RB. would u be able to get the car down here even?

[Afsil80]

wannabe wrote:
X5........

x11tybillion....

[Phats]

that's the thing, i have aluminum piping now, as far as getting the car down there, that's a toss up, but if i needed too, one way or another, i could

[KA-T_240]

Im not possitive on whether or not the wire and gas in the welder can decently weld aluminum. but should be able to tack and then bring it to a welder to get welded the rest off the way, im considering just tac welding the pieces and bring them to get welded. im going to try a couple welds on some spare stainless and see how they turn out

[Phats]

yeha i know u need different wire........and i THINK u need a different feed mechanism, push vs. Pull, i am sure someone can explain the differences, but i got a week or 2 before it is good to go....so i am not in THAT big of a rush, YET.......

[Joel]

u need a push mechanism with aluminum mig

[KA-T_240]

ya, i knew that just dont know if we have the stuff for it.