My DSM is friggen slow. Any thoughts?
-
weshole;181375 wrote:
Based on what you have as far as mods go (very modest), you may be able to net a high 13 sec pass at best. It may be nothing more than launch/ driving technique. Launch alone can do alot for cutting time off your e.t.That could be it, I was unable to avoid the water box as doing so would have involved going into the median and knocking over a bunch of stuff, so I did actually get some wheel spin at the launch.
I was launching at around 4k as I am still on a stock clutch as I haven't changed out my tranny yet for one with working 2nd gear syncros. I've got an ACT 2600 sitting in the garage tho.
-
TsiTom;181379 wrote:
Is it still a cat or a test pipe? (that may be choking some airflow)I would also get rid of that mas for a 2nd gen...even upgrade the injectors...
Do you still have stock IC piping?
That would entail getting an AFC or other form of fuel controller.
-
TsiTom;181379 wrote:
Is it still a cat or a test pipe? (that may be choking some airflow)its a high flow cat with a metal core instead of ceramic. its basically the least restrictive you can get without a test pipe.
I would also get rid of that mas for a 2nd gen...even upgrade the injectors...
I am planning on doing that, trying to save up for a few mods here next month.
Do you still have stock IC piping?
yep, sure do.
also im running 91 octane
-
JohnW;181369 wrote:
BTW who all lives in amber valley, I see a ton of nice cars out there, I'm sure you've seen the green machine out front by amber crossing.i see it, and hear it...belt squealing !! haha i always see a girl driving it though...or i think so anyways.
Yeah thers lots of nice cars there though, 2 evo's, 2 sti's, nice older 2.5rs..ect.
-
RidinRails;181384 wrote:
i see it, and hear it...belt squealing !! haha i always see a girl driving it though...or i think so anyways.Yeah thers lots of nice cars there though, 2 evo's, 2 sti's, nice older 2.5rs..ect.
My wife drives it since our other car isn't working right now. And the belt does suck.
-
TsiTom;181386 wrote:
Ive only read a little bit about that program...but cant you compensate for larger injectors as well?....Yep, you sure can, you can also do a stutter box, take out fuel cut, reset knock counts, and actually make the range of tuning wider.
I have a heavily moddified ecu program waiting to go in but im scurred cuz I'm not sure if I did everything right
-
D S ohM;181388 wrote:
If you are going to do a 2g mas, make sure you upgrade to 550s. Buy an AFC at the same time. If you dont want to spend 300 bucks on a wideband, take it to Tintmasters and have them tune it on theirs.Im hoping to get a cheap FMIC setup, injectors, 2g mas, and a dsmlink setup coming up here next month.
-
3_Series;181372 wrote:
Don't know if they would help too much, but you could try investing in some iridium plugs (Denso, NGK) for better spark. They're supposed to be particularly beneficial for forced induction applications.ngk brp7es or brp6es is all you need, dont spend money on expensive plugs....
-
JohnW;181391 wrote:
Im hoping to get a cheap FMIC setup, injectors, 2g mas, and a dsmlink setup coming up here next month.DSMlink is awesome if you have the extra money to spend on it. Way better than an AFC. Good choice.
SmitEvo;181394 wrote:
ngk brp7es or brp6es is all you need, dont spend money on expensive plugs....Well put. All you really need is some cheap NGK plugs. .028-.029 gap.
-
[QUOTE=D S ohM;181395]DSMlink is awesome if you have the extra money to spend on it. Way better than an AFC. Good choice.
Ya, I figure since I already have some experience tuning with logs on a computer I should be able to use DSMlink fairly easily. My ecu is already socketed besides. It is expensive but if you remember how many ppls afcs get stolen around here, it evens out dont you think?
-
JohnW;181396 wrote:
[QUOTE=D S ohM;181395]DSMlink is awesome if you have the extra money to spend on it. Way better than an AFC. Good choice.Ya, I figure since I already have some experience tuning with logs on a computer I should be able to use DSMlink fairly easily. My ecu is already socketed besides. It is expensive but if you remember how many ppls afcs get stolen around here, it evens out dont you think?
I take mine out every night to avoid that issue.
-
I'd put the stock ECU in it.
My old 1g ran 13.5 @ 95 w/ a 8.8 1/8 mile with exhaust a UICP pipe and a boost controller. By the end of the summer I had it, it was running 8.5 1/8 miles but I was back in Minot so it never made it back down to the 1/4.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login