MDGFAB can not deliver AGAIN!!!!
-
dont forget the cost of tire wear, cost of bringing your mileage closer to an oil change, brake pad wear, the 500 less miles youre going to get out of your air filter, and im assuming you probably got some type of beverage either on the way here or back?
bottom line is you paid a price that was WAY under what you should have paid for a great product. this was a PROTOTYPE manifold. you paid less because he needed a mock up car for a jig. DO NOT EXPECT A FUCKING PERFECT MANIFOLD when this is the first one hes made. i think its pretty impressive that a one man business got that job done in 4 weeks when he still needs to be doing other things to keep his business afloat.
he definitely shouldn't have quoted 2 weeks for it but you also shouldn't be getting so butt hurt over it. poor business practice is one thing but i think you're intelligent enough to understand that the reason there is a 1000 difference in price is to compensate for any kinds of issues being as this is a prototype manifold. he didn't give you a price break because he likes you or he was feeling like a nice guy, its because issues and a little longer wait are to be expected. jeebus if everyone got as worked up as you every time things didn't go their way...
instead of swinging your e-dick on every forum you can find, grow up and relax.here a psht, there psht, everywhere a psht psht
PVC SQUAD MEMBER #2- 95 CIVIC EX- DD 320whp on a mustang dyno
-
SPANISH-RICE;289134 wrote:
dont forget the cost of tire wear, cost of bringing your mileage closer to an oil change, brake pad wear, the 500 less miles youre going to get out of your air filter, and im assuming you probably got some type of beverage either on the way here or back?bottom line is you paid a price that was WAY under what you should have paid for a great product. this was a PROTOTYPE manifold. you paid less because he needed a mock up car for a jig. DO NOT EXPECT A FUCKING PERFECT MANIFOLD when this is the first one hes made. i think its pretty impressive that a one man business got that job done in 4 weeks when he still needs to be doing other things to keep his business afloat.
he definitely shouldn't have quoted 2 weeks for it but you also shouldn't be getting so butt hurt over it. poor business practice is one thing but i think you're intelligent enough to understand that the reason there is a 1000 difference in price is to compensate for any kinds of issues being as this is a prototype manifold. he didn't give you a price break because he likes you or he was feeling like a nice guy, its because issues and a little longer wait are to be expected. jeebus if everyone got as worked up as you every time things didn't go their way...
instead of swinging your e-dick on every forum you can find, grow up and relax.Don't quote a timeframe if you have no clue how long it's going to take. Again, poor business ethics.
Took him 4 weeks have half ass work? If he'd actually work on a customer's product instead of sitting on the interwebz, shit would get done and this thread wouldn't be 7 pages long.
-
Link;289135 wrote:
Don't quote a timeframe if you have no clue how long it's going to take. Again, poor business ethics.Took him 4 weeks have half ass work? If he'd actually work on a customer's product instead of sitting on the interwebz, shit would get done and this thread wouldn't be 7 pages long.
did you read what i said? i agreed that he shouldn't have quoted him that time but 4 weeks is not long for a manifold. full race asks for 4 weeks to ship a manifold on cars they've been doing for years. and thats without mock up and making a jig for it. have you ever made a manifold? have you ever fabricated anything? things go smoother the second time around. thus the reason for THE DISCOUNTED PRICE. this is not half-ass work. this is a first time prototype manifold that hasn't gotten tweaked yet.
being a one man business how is he supposed to promote himself and DEFEND himself if he doesn't spend time on the internet? you seem to be the one with all the answers so...
here a psht, there psht, everywhere a psht psht
PVC SQUAD MEMBER #2- 95 CIVIC EX- DD 320whp on a mustang dyno
-
I'm not going to lie, I think everyone got the point pages back. I agree with the one off having minor imperfections, hence the price break. What I saw in the shop would look good on any car... If it had to have minor warping fixed, he is still way under what a production manifold would cost. I'd imagine any warping would be fixed by Matt before a final manifold would go to a customer, but being he was rushed to finish (again nobody to blame but himself), I can see how he just wanted this to get behind him.
There has been enough attention to MDG about his time frames, now give him a chance to redeem himself....and if the next person runs into the same issue, then it will present itself.
"Screw me once, shame on you. Screw me twice, shame on me."
Leave the guy alone.
-
So Matt want to give me the same deal on a manifold for my supra? It could take you until February for all I care. And I will cover materials cost up front.
-
FG2;289139 wrote:
I'm not going to lie, I think everyone got the point pages back. I agree with the one off having minor imperfections, hence the price break. What I saw in the shop would look good on any car... If it had to have minor warping fixed, he is still way under what a production manifold would cost. I'd imagine any warping would be fixed by Matt before a final manifold would go to a customer, but being he was rushed to finish (again nobody to blame but himself), I can see how he just wanted this to get behind him.There has been enough attention to MDG about his time frames, now give him a chance to redeem himself....and if the next person runs into the same issue, then it will present itself.
"Screw me once, shame on you. Screw me twice, shame on me."
Leave the guy alone.
X2!!!! Point has been made and the customer has his manifold now. Let it die now.
Understeer is when you hit the wall with the front of the car
Oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall
Torque is how far you take the wall with you -
DrifterExtreme;289097 wrote:
So your saying never once has a "legit" business made a mistake and go over the quoted time frame to complete a job? (ie: construction).Get your head out of your ass.
once i can see... but when its on the majority of work, no...
-
funky_monkey58;289142 wrote:
So Matt want to give me the same deal on a manifold for my supra? It could take you until February for all I care. And I will cover materials cost up front.^ This.
-
I don't think i will be doing this again anytime soon.
-
DrifterExtreme;289400 wrote:
I don't think i will be doing this again anytime soon.Darn so any way I could get a good guy special at least? Like I said Time is not an issue for me. And will cover materials right off the bat.
-
FG2;289139 wrote:
I'm not going to lie, I think everyone got the point pages back. I agree with the one off having minor imperfections, hence the price break. What I saw in the shop would look good on any car... If it had to have minor warping fixed, he is still way under what a production manifold would cost. I'd imagine any warping would be fixed by Matt before a final manifold would go to a customer, but being he was rushed to finish (again nobody to blame but himself), I can see how he just wanted this to get behind him.There has been enough attention to MDG about his time frames, now give him a chance to redeem himself....and if the next person runs into the same issue, then it will present itself.
"Screw me once, shame on you. Screw me twice, shame on me."
Leave the guy alone.
I said this 4 pages ago.... -
Yeah so how about put your ego aside and let this thread die. huh?
-
DrifterExtreme;289439 wrote:
Yeah so how about put your ego aside and let this thread die. huh?you couldve just not said that^^^^ and it wouldve been dead, no one said anything for two days besides Joel, and it didnt have to do with anything.
the thread was pretty much dead anyway
so your comment is a fail.
-
funky_monkey58;289402 wrote:
Darn so any way I could get a good guy special at least? Like I said Time is not an issue for me. And will cover materials right off the bat.looks like I'm building my own.
Will post pics.
-
FG2;289646 wrote:
Nobody listened, hence the 4 more pages.lulz..bumpity bump bump
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login