New Stuff

[zbrown]

got my meth/water working and have been messing with it. I have been playing with one smaller jet moving pre and post turbo to see what sizes i want for sure, and the effects

right now on the one smaller jet on a 50/50 post turbo i get about 30* above ambient with my IATs... at 6.5psi boost after a full pull

[DelSlow]

Old News.

Is that a Snow kit?

[funky_monkey58]

Sweet fire extinguisher mounting!

[KA-T_240]

Zac do we get to see this thing this weekend???

[funky_monkey58]

KA-T_240;312375 wrote:
Zac do we get to see this thing this weekend???

I want to see it/get a ride in it if it is out this weekend!

[zbrown]

DelSlow;312368 wrote:
Is that a Snow kit?

na, coolingmist stuff

funky_monkey58;312370 wrote:
Sweet fire extinguisher mounting!

lol if only you knew...... I had an Oring blow out of one of my injectors when i was beating on it....

smelt gas, opened the hood and there was a garden hose of gas under the hood. I don't know how it didn't go

no chances now, lol

KA-T_240;312375 wrote:
Zac do we get to see this thing this weekend???

na man, going to fargo

not worth it for how strict they will be on a cage at BIR

though would be a blast down there for sure, i am jealous of all you guys going, haha

[btleier]

zbrown;312384 wrote:
na man, going to fargo

not worth it for how strict they will be on a cage at BIR

though would be a blast down there for sure, i am jealous of all you guys going, haha

booooooooo

[DelSlow]

May be a retarded question but, does that meth injection nozzle have any problems being so close to the BOV? or directly across from it? You would think when it opens, you would be releasing quite a bit of meth/water.

[SPANISH-RICE]

anytime the bov will be open the meth shouldnt be spraying iirc

[DelSlow]

Well what is this kits method of activating the solenoid?

[zbrown]

ok so I didn't get to go the track the other weekend like i had planned on because the fuckers didn't get my windshield done, so that pist me off

so hopefully get there for the next street legal

anyway, just got my boost controller on. It is a hallman, and paid a little extra for the ceramic ball and extra spring

I didn't think the car could spool faster but i can definitely tell it does with the addition of just the BC

Bumped the car to 10psi now, honestly can't believe how much power these motors pick up on every pound of boost, it is nuts

as always, i like it nice and simple

and some will probably hate on me for this but whatever

my aluminum hood had a nice dent in it.... so i got rid of it.... and helped evacuate air in the process (thanks parker, haha)

FYI this picture does not lie....

with tape strips hanging off the edge of the vents you can very easily tell that there is a good volume and velocity of air coming up and out the vents when you are at speed

it always makes me LOL when people jack the back of the hood up and think that is going to help anything.....

and it gives the gawkers an idea what is under the hood, haha

needs some actual paint now

[integra_gsr98]

Fucking intercool that thing already.......

[zbrown]

why? I have my big nozzle now, and my IAT's run at or below ambient air temps with the meth injection

I spose i should get a screen shot of a log so you believe me

[aliengotpsi]

do a 1st ------> 4th gear pull , what are your intake temps after that on a day its 85 degrees out.

[beachbum_jon]

what is up with your front bumper?

[PSiedTSi]

beachbum_jon;313860 wrote:
what is up with your front bumper?

Hmm...looks like the hole is about as big as an IC....hmmm I wonder??

[beachbum_jon]

PSiedTSi;313861 wrote:
Hmm...looks like the hole is about as big as an IC....hmmm I wonder??

hmm...that is what i was thinking at first, then i remembered that he going the water meth route vs. IC

Oh and zac, what is the fitting just before the inlet of the compressor for?

[PSiedTSi]

beachbum_jon;313864 wrote:
hmm...that is what i was thinking at first, then i remembered that he going the water meth route vs. IC

And then you remembered he used to have a GT42/13B setup...fail.

[zbrown]

beachbum_jon;313864 wrote:
Oh and zac, what is the fitting just before the inlet of the compressor for?

for a pre turbo injection nozzle

aliengotpsi;313850 wrote:
do a 1st ------> 4th gear pull , what are your intake temps after that on a day its 85 degrees out.
s

i was in the fargo the last couple days, i will do a log with a screen shot

and i have 3 gears...

[zbrown]

ok did a log this afternoon

i guess i lied a bit, it gets 25-30* above ambient

not to worried though because it is running very strong like it is.... i am on E30 with a 10.3:1 CR motor and some decent timing as you can see without any problems

for the HP level it is at i should probably be running two 8 ghp nozzles not just one, but it runs really well right now so

if you look at the log times from the beginning to the end you will see it took right at 7 seconds for that pull... i rolled into it a little bit so i didn't spin. And i didn't top 3rd out because that is too sketchy on the my road. The 2>3 shift puts you right in the 95-98mph area

Boost is just a PID and that is why it is sort of unstable, if you look at the MAP you can see how stable the boost actually is

oh and i heart HPT