Anybody done cams?
-
don't bother throwing money at the 3.8
-
AtlanticBlue;316542 wrote:
Im thinkin about getting a set of cams for my car. it a set from supersixmotorsports.com. i know i need new valve springs and i already have those picked out. They are the CompCams 915 beehive springs. here are the specs for the cam i'm lookin at:Duration: 218/226
Lift: .50/.50
Rockers: 1.7
LSA: 108I'm doing this to my 3.8 v6 stang. just wondering if anyone has some insight on a better cam to use or if anyone knows how to swap cam shafts out. :icon_scratch:
Hey man... let me give you 2 things of advice.
- do what you want... its YOUR car.
- check with sites that deal with mustangs. Seriously. No offense to a lot of these guys, but most have never owned a ford, let alone a mustang (and know what that 3.8 can do). Check out this site and ask the same question... you might get the same response, but at least it will be guys id be willing to take to the bank with.
http://www.moddedmustangs.com/forums/
Im on there everyday. In fact, theres a thread called "North Dakota" where theres a few of us with stangs in the area. Most will be willing to help ya do the swap on cams or engine too!
> bubba;306060 wrote:
> i vote hookers and blow
-
i drove MY mustang today, Sir.
-
GarageAlchemist;316571 wrote:
i drove MY mustang today, Sir.I drove mine too...the one that I swapped cams in...
-
damn it... why am I the bad guy here? haha
in my defense, I dont know what you guys have or have not driven. Do I think he should do it? No. Is it really my decision? No. he wants cam help, im just pointing him on where he can go to get it.
with that said... what kinda stang did ya have?
> bubba;306060 wrote:
> i vote hookers and blow -
racing a v6 stang is like getting in a fight with with a girl....cant brag if you win and your made fun of if you loose!!!
yes my car would loose but you get the point. LOL i joke im hoping to get some cams and headers in my car next summer when i get some cash and people would laugh at that but its your car do what you want. Those 3.8 are supprisingly potent from what i have seen.
-
vita;316570 wrote:
Hey man... let me give you 2 things of advice.- do what you want... its YOUR car.
- check with sites that deal with mustangs. Seriously. No offense to a lot of these guys, but most have never owned a ford, let alone a mustang (and know what that 3.8 can do). Check out this site and ask the same question... you might get the same response, but at least it will be guys id be willing to take to the bank with.
http://www.moddedmustangs.com/forums/
Im on there everyday. In fact, theres a thread called "North Dakota" where theres a few of us with stangs in the area. Most will be willing to help ya do the swap on cams or engine too!
I can help you on the cam swap, or anything else you want to do to the lil 3.8. Hit me up.
Understeer is when you hit the wall with the front of the car
Oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall
Torque is how far you take the wall with you -
Sheeran;316586 wrote:
Those 3.8 are supprisingly potent from what i have seen.this generation of 3.8L not so much.
I did have an old friend run mid 13s with ported heads and a Vortech (and a few other things) in a 3.8L Thunderbird.
The other option is a 4.3L stroker build based off the 4.2L truck V6. Back when I was following the Thunderbird crowd a little more those were starting to become more popular.
-
if you look at it the 3.8 should be able to put out a better power/displacement ratio...i did the math once but i cant remember how much more displcaement per hole there is. V6 should be able to carve better due to less weight so a fairly decently built V6 should be a good all around vehicle.
-
Sheeran;316589 wrote:
if you look at it the 3.8 should be able to put out a better power/displacement ratio...i did the math once but i cant remember how much more displcaement per hole there is. V6 should be able to carve better due to less weight so a fairly decently built V6 should be a good all around vehicle.Really? Your going to argue the power/displacement and weight argument?
I would love to see a mustang "carve" better because it has a v6 vs v8. come on.....
-
im not a mustang guy at all their kind of like civics everyones got one, but the potential of a motor has to do with HP/liter and HP/cylinder and the 3.8 is able to put out fairly impressive numbers in both aspects. Carve better means Auto-X type stuff. Its got less weight in the front so theoretically it should be better at that sort of thing.
but sorry i forgot this is Fargo Street where your nobody unless you flame people untill you have a post count above 5k when you get it reset and you now have to post worthless crap everywhere to get back your mighty power. All im trying to do is have a discussion on v6 mustangs getting cams.
-
for the price of a good set of cams you could pick up a 5.0-4.6 swap? or at least be in the ball park, and you'll be way out ahead as far as power. or at least that's how i'd look at it. And with there being people volunteering to help you do cams i'm sure they'd be just as happy to help you do a motor swap.
btw... you got a PM back.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login