Status of your project car...
-
i just finished putting the motor together for the talon. ill do the timing and drop it in should be done next weekend
2001 GSX-R 1000- one wheel wonder
1976 Chevy K5- lifted beater
1995 240sx- DDD, daily driven drifter
1995 Eagle Talon- wire tuck,shaved bay.. project in the works
2006 Honda CRF50-stunt machine
1993 Eagle Talon tsi-5spd swap,wire tuck, holset hx35. on E85...SOLD
2000 Ford F250 7.3L powerstroke...SOLD
-
Mine was running, then blew the HG. It blew off a coolant hose, turns out the fitting was rusted and had no bead roll WHATSOEVER. Dumped all coolant, and you can guess the rest. Stout motor though, I won't go into details on how far she drove because it proves that I mis-read what had happened.
Now it's 100% torn down, main/rod bearings/rings/gaskets/seals ALL arrive tomorrow, rotating assembly gets put back together tomorrow, gasket/seal on Thursday along with head and manifolds.
Should be running Thursday night, break it in, clutch is broken in, so that's good to go; leak check.
Friday, drive to work, take on interstate; leak check.
Saturday, 2 hr drive to Atlanta for NHRA Sport Compact weekend.
That being said, I don't see an option that suits me...make a 'Was done, blew it up already, almost ready again' and I'll vote...
-Peter
1991 240SX
-
Afsil80;211396 wrote:
Mine was running, then blew the HG. It blew off a coolant hose, turns out the fitting was rusted and had no bead roll WHATSOEVER. Dumped all coolant, and you can guess the rest. Stout motor though, I won't go into details on how far she drove because it proves that I mis-read what had happened.Now it's 100% torn down, main/rod bearings/rings/gaskets/seals ALL arrive tomorrow, rotating assembly gets put back together tomorrow, gasket/seal on Thursday along with head and manifolds.
Should be running Thursday night, break it in, clutch is broken in, so that's good to go; leak check.
Friday, drive to work, take on interstate; leak check.
Saturday, 2 hr drive to Atlanta for NHRA Sport Compact weekend.
That being said, I don't see an option that suits me...make a 'Was done, blew it up already, almost ready again' and I'll vote...
Ya, I realized I forgot a halfway one right after I hit submit...lol
-
judt eiting on my godamn turbo to get here in the mail then im mobile again. F'n A cotton
here a psht, there psht, everywhere a psht psht
PVC SQUAD MEMBER #2- 95 CIVIC EX- DD 320whp on a mustang dyno
-
Fuuuuck the KA.
Worthless ass motor. The ONLY reason the CA is in this car is because the KA crapped out on me. And I am pretty happy with how the CA handled the overheating by only nuking the head gasket. Only blew out one chunk by a water port in between the #3 and 4 cylinders. It was a factory gasket, too.
Hell, compression numbers for all 4 cylinders was still within specs, aside from the +/- 15 difference between #1 and 2.
Numbers were 160, 145, 142, 142. Minimum is 140, so I said 'fuck it, do it now, save another headache later.
Block was hot tanked, honed, decked; head was resurfaced, and got a mild port and polish.
But now...Cometic 2mm + ARP studs, ARP flywheel bolts, deleted butterfly valves, ACL race bearings (main and rod), OEM piston rings, all new seals, gaskets, hoses, O2 sensor, thermostat, etc.
I'm not cutting corners this time. Lesson learned, haha.
-Peter
1991 240SX
-
Depending on which stage of my project you are talking about I'm either almost done or barely started. Basically, I need a new BOV and a good tune on the dyno and I'm set w/ the current motor setup. My 2nd motor is nearly complete, just awaiting cams and a good P&P on the heads....but I really don't want to install that until I get to the next phase involves a different transmission as well as a new rear end and drive shaft...and I've barely started even thinking about that yet.
-
mines on going. i cant do anything that will have her down for more than a day or two so im stuck that way. system and alarm going in this week, valve train getting adjusted and gone over more than likely this week as well. plans for this spring/summer include suspension, brakes, wheels, tires, prolly just a cam instead of the mini-me for now.
-
well, i stripped my crx down to a bare shell. then i striped my rhd front clip. and 2 tyrs later thats about it.... hahah
mine will be done when hell freeze's over.
-
just waiting on the gears and intallation kit and im ready to put it all together.
Understeer is when you hit the wall with the front of the car
Oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall
Torque is how far you take the wall with you -
still waiting on my fuckin steering that i ordered in january. Other than that, need to order the 9" and install, possible shorten driveshaft, some wiring for the fuel pump and sub. In front, finish assembling the engine/trans and set it in, weld the wastegate on and make a downpipe. Not much, hopefully it will be done by may.
-
tjamz;211404 wrote:
Depending on which stage of my project you are talking about I'm either almost done or barely started. Basically, I need a new BOV and a good tune on the dyno and I'm set w/ the current motor setup. My 2nd motor is nearly complete, just awaiting cams and a good P&P on the heads....but I really don't want to install that until I get to the next phase involves a different transmission as well as a new rear end and drive shaft...and I've barely started even thinking about that yet.You forgot about all the ICE!!!
**My car is stored/parked now.
Contemplating fixing ALL the petty imperfections with the Miata I/E: strut mounts, mirrors, paint imperfections, etc. Maybe doing some performance stuff as well.**
-
I was hoping to have my fiero done by the topper car show, but no such luck. I need about another grand in parts and with the wife not working paychecks do not go far. So I took up doing automotive work in my spare time, and advertised on craigslist. Now I am 3 weeks behind on automotive work. Everyone hit me at once with major work so now I am working a extra 30+ hours a week at my home shop fixing cars. And with the extra money now I am buying more shop equipment instead of parts for my projects.
Plus I have bought a couple more projects here and there like a bandit trans am.
Boys and Their Toys Auto
From general automotive maintence to major service work. You name it and I'll see what I can do. Engine swaps, rebuilding, suspension, brake upgrades, etc...Current Toys: 1987 Fiero GT, 1989 Turbo Trans AM, 2003 Lancer, 1994 Civic Lx
Phone: 701-371-5615
E-mail: [email protected]Please click image to see my website.
-
I bought a house thanks to Bjornstad so my project has yet to begin. Oh and the integra is way on the side burner now. Home ownership > cars.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login