just curious about hp...

[SPANISH-RICE]

blackcherrytsi;243979 wrote:
whats kinda hp am i looking at with the 20g? And still wondering what the pvc squad is...

supposedly a large 20g is supposed to be good for 400+ might be a tad bit laggy for what your looking for, a 16g would be an awesome budget turbo. But i think the 20g is an awesome turbo

[blackcherryTSi]

20g for 350... may do it... undecided.... also had a question.. anybody have a jdm dash peice where the cup holders are? kinda vauge but it turns that into just a pocket

[slow90gsx]

https://secure.buschurracing.com/catalog/product_info.php?cPath=22_38&products_id=434&osCsid=93cf107efb8002a8df95aecaf5226c5c

We went to buschur and bought the car from a guy that worked there this is the one^^^

[SPANISH-RICE]

blackcherryTSi;244000 wrote:
20g for 350... may do it... undecided.... also had a question.. anybody have a jdm dash peice where the cup holders are? kinda vauge but it turns that into just a pocket

http://passwordjdm.com/EG-92-95-Civic-HOP-Optional-Center-Console-P2359C138.aspx

[zbrown]

SPANISH-RICE;243981 wrote:
whats wrong with a turbo fwd car for what he wants? Traction problems? Almost any other application is just going to run into diff problems and costly clutch swaps with that power to get even close to what hes looking for.

Please elaborate???..... all knowing one

SPANISH-RICE;243900 wrote:
Woaaa dont get all defensive the only reason why you are involved at all with anything i said was becuase i fucking agreed with you. I was saying that for other people like travis who seemed confused by the idea of someone using a 50 trim and making more power than 270hp.

But im glad that you also know what i know, and that you feel the need to throw around dimensions and basic math i already knew about your useless fucking turbo. Any one can use google and tell you your in./ex. Diameters, congrats

stop trying to sound so smart by telling people the small about about basic shit that you know

You were calling me out, insinuating I was using trim to differentiate the size of turbos...... as bigger or smaller

I only clearly pointed out that different turbos use different characteristics to name them........... and that in this case it was trim that was used

Obviously I looked up the wheel specs of both to illustrate my point....

Since you are so well endowed with the understanding of turbo dynamics will you please help me size the optimum turbo for my setup???........ please master

[91psiTSI]

200hp on 10 psi

[speed_ricer69]

blackcherryTSi;244000 wrote:
20g for 350... may do it... undecided.... also had a question.. anybody have a jdm dash peice where the cup holders are? kinda vauge but it turns that into just a pocket

hey talk to lil mikey

[DrifterExtreme]

the 20g will not be good for his setup right now as i beleave it has a tdo6 compressor wheel and housing? correct me if i'm wrong zac. 1 full size up from the 14b which uses the tdo5 housing, that with the 1 step up turbine wheel and a 10cm turbine housing vs the normal 6 or 7cm turbine housing would slow spool-up, conciderabley.

again with a built bottom end he is capable of running higher boost to compensate for the low compression.

so i don't see how this is a bad set up. he has room to upgrade and it will be plenty fun at the 200-240 whp range with a nice torque curve.

[zbrown]

DrifterExtreme;244062 wrote:
the 20g will not be good for his setup right now as i beleave it has a tdo6 compressor wheel and housing? correct me if i'm wrong zac. 1 full size up from the 14b which uses the tdo5 housing, that with the 1 step up turbine wheel and a 10cm turbine housing vs the normal 6 or 7cm turbine housing would slow spool-up, conciderabley.

Are you being very sarcastic??... or serious??

[DrifterExtreme]

very serious, why?

[zbrown]

DrifterExtreme;244088 wrote:
very serious, why?

super

[gsrEK]

um who cares? run a gt40r then u will have 301 hp haha

[HandoEX]

I would just put "10s next spring" in my sig and call it good.

[no_slow_clap]

slow90gsx;244023 wrote:
https://secure.buschurracing.com/catalog/product_info.php?cPath=22_38&products_id=434&osCsid=93cf107efb8002a8df95aecaf5226c5c

We went to buschur and bought the car from a guy that worked there this is the one^^^

same thing as the fp green. good for making 400w at 28 psi..

[SPANISH-RICE]

zbrown;244032 wrote:
you were calling me out, insinuating i was using trim to differentiate the size of turbos...... As bigger or smaller

i only clearly pointed out that different turbos use different characteristics to name them........... And that in this case it was trim that was used

obviously i looked up the wheel specs of both to illustrate my point....

Since you are so well endowed with the understanding of turbo dynamics will you please help me size the optimum turbo for my setup???........ Please master

at no point did i call you out, in fact i dont even acknowledge you on this website. Its you that assumes everyone is calling you out because you think you know everything.

I made a comment on what trim is because a previous comment was made

gsrek;243877 wrote:
true. I maxed my 50 trim out at 270 whp on a mustang dyno at 18 psi. I wish i woulda got a bigger turbo also.

and i did not want certain people to think that just because they have a "50 trim" they are gonna max out their turbo at 300 hp. See how that makes sense?

Reread the shit that was said before even trying to throw your opinion around again becuase all it does is make you sound like a douche with "something to prove" to the online community.