V-mount

[Rexwagon]

Yes it looks good.

[no_slow_clap]

thats going to look sweet when its done!!

[itRfan]

mad probs b almer!!!! Looks siiiiick

[DrifterExtreme]

looks good, i can't wait to see the finished product.

is there going to be a mount in the front of the intercooler, to lessen the weight on those tabs?

[drift86]

There is a mount welded to his radiator support. It is welded inside the hood latch so u can not see it in the pics and it is mounted to the top intercooler mount... It is mounted solid. Now all we need is intercooler piping and a few other random stuff...

[bubba]

Looks very good, cant wait to see this back in action...

[b almer]

yeah the hardest thing now is trying find coolant hoses that will work

but i am going to try the flexable one but i thing it will be to tight fit with the intercooler piping

[DrifterExtreme]

just make them with aluminum tubing or stainless if you don't have access to a tig welder.

and then go get couplers to connect the new hard pipes to the motor and radiator....

[b almer]

yeah i was thinking of but i dont know were i can get the tubing from

[DrifterExtreme]

http://store.racing-solutions.org/ i get all my bends from this place.... very good prices

[Afsil80]

Don't forget the ducting on the sides to keep the air forced in, and the ducting to evacuate the air after passing through both units.

[b almer]

yeah i know i am getting some aluminum from my work so the air that comes in the front bumper goes to the vmount and then goes out the hood vent right away

and then making it so the air that goes under the car goes and helps cools the motor