Dyno in fargo Jan 8 & 9
-
Cool. I did the swap in that civic hatch. Nice to see that he got a decently strong motor at least.
-
wannabe wrote:
He didn't run n2o that I'm aware of. It's fricken hilarious. A under 600 pony supra is running faster times than supra's upwards of 900 horse. Way to go Dave!
I was just talking to the owner of BoostLogic this morning. He dyno'd almost identical to me with a 71mm turbo (my turbo is 72mm). He made ~570rwhp on boost. He had a lockup converter and with the converter locked up he made 730rwhp! I knew there is a lot of loss through a high stall converter, but that seems just crazy.DaveH
'94 Supra- 7.77 @ 176mph -
I don't doubt that dave- the converters soak up soooo much power- alot of good race powerglides only take 20-30 HP to turn (which is minute) and I find alot of drag race guys that put 900 on the engine dyno only turn 550-650 on the chassis dyno. Time for 5 speed dyno time again???
andy -
DaveH wrote:
...he made 730rwhp! I knew there is a lot of loss through a high stall converter, but that seems just crazy.I was saying to Stephen and TJamz that your turbo should be making 700+ rwhp. I was trying to figure out if the timing was conservative, the boost real low, or I had my numbers backwards.
Makes more sense now. Can you lock your converter up????
Fvckin machine took my quarter
-
DaveH wrote:
I may bolt in the 5-speed and head down.... we'll see.You got a clutch that will hold it?? BTW, Chris in Bismark is buying a Carbon \ Carbon - borrow it quickly with my tranny and make a few pulls.
$3k for lockup is ridiculous.
Timeslips are better than dyno graphs
Fvckin machine took my quarter
-
Dangler wrote:
You got a clutch that will hold it?? BTW, Chris in Bismark is buying a Carbon \ Carbon - borrow it quickly with my tranny and make a few pulls.
$3k for lockup is ridiculous.
Timeslips are better than dyno graphs
I'm not sure what the clutch will hold... it's a 6-puck ceramic. Prob about 591rwhp is where it would die.
I took the auto trans out tonite... step 1.:DDaveH
'94 Supra- 7.77 @ 176mph -
DaveH wrote:
I was just talking to the owner of BoostLogic this morning. He dyno'd almost identical to me with a 71mm turbo (my turbo is 72mm). He made ~570rwhp on boost. He had a lockup converter and with the converter locked up he made 730rwhp! I knew there is a lot of loss through a high stall converter, but that seems just crazy.Ive seen it before, not quite those drastic of #'s but pretty far out there. it's not that your loosing hp. It's that the higher the stall, the more slippage at higher rpm's.
O.K., it's loosing hp no matter how you look at it.
-
weshole wrote:
Consistency!!!! Alot less chance of missing a shift and possibly destroying an engine. Those 2 would be my first guesses.
I gonna go with that he wouldn't be nearly as quick. The quickest 6 speed Supra is 9.6 something, and that is with over 1000HP. Also, it was difficult to get clutches to hold the power. -
Ethan is mostly right, it's really tough to get a clutch that will launch a (relatively) high HP car at the track. You can drop $4k on a tilton carbon/carbon but I think I'll pass on that. Plus with the auto, you can use a transbrake and build all the boost you want off the line. And finally, with a big turbo there is lag after you shift a manual trans... with the auto you just hold it to the floor and move the shifter.... keeps full HP going the whole pass.
DaveH
'94 Supra- 7.77 @ 176mph
I may bolt in the 5-speed and head down.... we'll see.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login