Greddy Turbo Kits?
-
harwood39 wrote:
This is what i am thinking for my setup since Greddy would be expensive.304 Stainless Header
Turbonetics T3/T4 T04E 5 bolt .50 .63 turbo
24"x12"x76mm Front Mount Inter Cooler
38mm Tial Wastegate
3" Downpipe
Greddy Type RS BOV
Walbro 255lph Pump
DSM 450cc Injectors
SX Fuel Preasure regulator
SLS MBC
SLS IC Piping and intake
AFCTufte let me know what you think of the setup. im thinking total will be about $1500 so far with what ive priced everything out at.
Unless your using junk Ebay parts not a prayer for $1500. That FMIC size is way overkill as well. The description of the turbo you describe says nothing except compressor/turbine housing sizes.
Building a custom kit is gonna run you around the same price as a Greddy if not a bit more but its gonna make a lot more power.
-
plus the price of install.......harwood your way over ur head on this one because....we all know you wont turbo your civic anyways because you change your mind every day and you dont even have the money......first your gonna make it a show car with a body kit....now ur making it a drag car.....then its a AUTOX/ daily driver.....soon its gonna be a go-cart.
-
mwc1 wrote:
plus the price of install.......harwood your way over ur head on this one because....we all know you wont turbo your civic anyways because you change your mind every day and you dont even have the money......first your gonna make it a show car with a body kit....now ur making it a drag car.....then its a AUTOX/ daily driver.....soon its gonna be a go-cart.ask any ricer, any real ricer...its not whats done to your car its about your plans
-
I know i will need a new clutch. Ok, i need some power estimations. how much power for the Greddy Kit? how much power for the SLS Kit?
After Pricing shit out all the way SLS's kit is a much better idea than just peicing one together.
And my car is still going to get a body kit on it after i turbo it.
-
304 Stainless Header
Turbonetics T3/T4 T04E 5 bolt .50 .63 turbo(same turbo used in the Drag Kit)
24"x12"x76mm Front Mount Inter Cooler
38mm Tial Wastegate
3" Downpipe
Some Cheap BOV
All Lines, Gaskets, Fittings, Ect.
------------------------------------------------------$850
Greddy Type RS BOV----$175
Walbro 255lph Pump----$95
DSM 450cc Injectors----$50
SX Fuel Preasure regulator----$130
SLS MBC----$45
SLS IC Piping and intake----$350
AFC(used)----$150-175And of course install and a clutch. No this isnt SSAutoChrome stuff. But i take it you guys have experience with them?
Anyways, I added it all up again and its about $1850-1900
Oh ya, and i take it an Intercooler is a must, at least thats how you guys make it sound. I am wondering because i found another kit that is basically the same setup, but it has all the piping but no IC, it just runs a pipe where the IC mounts.
-
LankorDie wrote:
I know Sean said it already but you can get some **great **deals off of Honda-Tech.Let the low balling start.
I forgot about H-T, i found a complete kit on there for $1400, basically everything except Fuel management, and IC. all the piping and every thing.
-
Idk what kinda manifold, wastegate, FMIC, downpipe and turbo your gonna get for $850.
My kit put down 241whp and 202 trq on 9-10 psi. We never got to tune the car as the wideband was down. Based off how choppy the graph was it was pretty damn rich.
Before i had the AFC and 450's in it and was just running the lame ass FMU it ran 12.5@109. FMU was all i had laying around that day so we used it took it to the track and ran it as is. Should easily run low 12's.
Nick
SLS -
-
LankorDie wrote:
Thats crazy I should forget my B-series swap and have you put together a turbo kit for my Crx. D16a6 baby.DUHHHHH, your finally seeing the light huh lank.
-
B series swap = overrated.
D series w/turbo = very underrated.
-
Bad93ex wrote:
B series swap = overrated.D series w/turbo = very underrated.
I don't agree with this 100%, I agree that some b-series swaps are over rated, especially the b16 imo. But there are others that are good bang for your buck b18b, etc.
although I do agree with the single cam being under rated for a very long time. people are finally starting to realize their potential.
-
If you read, i am not going to get the $850 kit. sounds too cheap too me. I am picking up the $1400 one than buying the Fuel Preasure Reg, AFC, Possibly Intercooler, Injectors, Fuel Pump, MBC, Boost Guage. It will run me close to $2000. It has basically everything that comes in the Drag Kit. Same Exact turbo, wastegate is same brand, im gettin a Greddy Type-RS BOV with it too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login