Joels properly set welder VS Mine........
-
Grr;211286 wrote:
zac is the god of welding, next to my boss, but thats not the point. Point is he made a clearly informative post and had very obvious results. ZBrown>all, end of storyBTW, zac is the best there is at penetration, ive experienced it first hand
Fixed....
Hey zach, I didn't ask you to do it with your welder, I said weld with my welder on the same material. Why a SMALLER MACHINE make it easier? Why is there porosity in your first weld? I thought you were l33t?
If you want me to post pics from work welding with proper equiptment, I can do that! -
Also, Just because you "manipulate" or as it is called in the industy oscilate, more doesn't mean it is proper, or a stronger weld... Also, Triggering with my welder would never penetrate. And triggering is NEVER as strong as actually welding in a continuous pass. It is used to fill in gaps where heat would burn holes through the pipe. Also, Why don't you try welding a bead longer than 2 inches?
-
Joel;211296 wrote:
Also, Just because you "manipulate" or as it is called in the industy oscilate, more doesn't mean it is proper, or a stronger weld... Also, Triggering with my welder would never penetrate. And triggering is NEVER as strong as actually welding in a continuous pass. It is used to fill in gaps where heat would burn holes through the pipe. Also, Why don't you try welding a bead longer than 2 inches?OH you have so much to learn..........I could rip apart everything you just said there but i wont, because i like it when you talk out your ass........ and sound ignorant as fuck
One thing i will say is you are totally in left field with triggering not penetrating..........
Your welds look like ass, i just wanted to point it out, I guess if you dont understand how the process even works how can i expect you to adjust the machine to not look like bird do do
I welded those three beads on that one piece because that is what i mocked up in 5 mins,
Your welds are bad/shit, just end your rant
I could flux core a bead with no shielding that looks better than what you had on there
-
You going out of your way to show everyone how much better you are than me looks 10 times better? right. take the challenge next time you are in fargo... or don't talk smack. > zbrown;211301 wrote:
I could flux core a bead with no shielding that looks better than what you had on there
prove it
-
LOL at Haterade Joel. Dude, you posted up pics, and it looked like dogshit. Thats the reality, deal with it. Sure you can weld better at work, but you didnt post up pics of that so STFU. Zac doesnt need to do a weld longer than that, he proved his point and i could guarantee that hes not pulling some shady shit like spraying it whith spatter sheild, hes better than that.
Dude, you got pwned, accept it and take it like a man, no big deal it happens to everyone once in awhile. Honestly, when you posted those pics up, i thought to myself, those look worse than some shit i do, and i simply dont give a fuck what my welds look like alot of the time.
BTW, a correctly set welder will not leave spatter, my boss has 30 years in the field professionally, he told me so. -
Grr;211305 wrote:
LOL at Haterade Joel. Dude, you posted up pics, and it looked like dogshit. Thats the reality, deal with it. Sure you can weld better at work, but you didnt post up pics of that so STFU. Zac doesnt need to do a weld longer than that, he proved his point and i could guarantee that hes not pulling some shady shit like spraying it whith spatter sheild, hes better than that.
Dude, you got pwned, accept it and take it like a man, no big deal it happens to everyone once in awhile. Honestly, when you posted those pics up, i thought to myself, those look worse than some shit i do, and i simply dont give a fuck what my welds look like alot of the time.
BTW, a correctly set welder will not leave spatter, my boss has 30 years in the field professionally, he told me so.
^6 ft, 1 pass, no starts/stops -
Joel;211303 wrote:
You going out of your way to show everyone how much better you are than me looks 10 times better? right. take the challenge next time you are in fargo... or don't talk smack.prove it
Ah this is so fun, I would love to stay up and relish in this but the woman is here so i say bedtime.........
unfortunately joel you will be up all night worrying about getting owned on a forum and eventually rubbing one out tonight
-
Good job, those look nice. Its a real benefit to work with nice clean metal with good gaps and stuff, man i hate welding on rusty old farmer shit.
BTW, good story here. One day i had to weld in this chemical tank, aluminum with the spool gun right. Anyway theres only a big enough hole to get your torso through, and it was a 16ft tank, welding was on the baffles inside. I had to hang the from forklift by my feet while holding the gun and cables, 20ft in the air and get set into this thing. Aside from the stink, the shit burned your skin as it was in direct sunlight and about 90 degrees and humid that day. I thought, WTF is this shit anyway, especially getting jerked around on this fuckin forklift you know? So i had to do this shit for 30-40 minutes and it sucked balls, but i ended up making a couple hundred in cash on the deal.
So, if you ever think you have it rough, think again -
bubba;211327 wrote:
Hmm... looks like the typical Joel gets pwned and he keeps running his mouth making him look dumber and dumber... U can talk all you want, you're just gonna keep getting more and more pwned...typical brandon, throwing his 2 cents in threads where he doesnt belong, just to be cool.
-
Joel;211345 wrote:
typical brandon, throwing his 2 cents in threads where he doesnt belong, just to be cool.Yep, u gonna get all butthurt and cry about it now or what... his weld > your weld fucking deal with it... Now Joel's gonna try to say I dont know shit about welding cause I never went to a little class to get certified and do it for a living...
-
I think what Zac was trying to point out here is that the one particular weld that you made didn't turn out very well Joel. Perhaps it was the lack of familiarity w/ that particular welder or whatever. What Zac was trying to point out (successfully IMO) was that the welder you used was enough of a welder for what you were doing and that welds can be done w/o the spatter that happened to you. Your other welds look good Joel (the ones from work) which leads me to believe that the settings were off a bit....which is exactly what Zach was trying to prove as well.
-
jesus i miss alot when i work nights....this blows. By the way why are these two fighting about welding? Isnt there something better to do? It is obvious that zachs welding owns joel but joel hasnt had much time welding if im correct? I cant weld for shit but really wanna learn how in fact i think this summer or winter i will do the daves welding for two weeks or see what they got going on up at the skills and technology on 19th.
"tell the misses that thats how you got the man and thats how you KEEP the man
words to live by from the wise one"
-weshole
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login