Greddy Turbo Kits?
-
overall everyone is saying if you go with greddy...your gonna get raped....their cheapest fmic is like 700 bucks.
-
Its not necessarily raped. $2000-2500 is a pretty damn good deal for a complete turbo kit. $700 is a pretty good deal as well for a complete FMIC setup although once again the Greddy uses small and very long routed piping. But the point being is the Greddy kit is built very conservative to suite everybody. In which case its not gonna make big power, its not gonna give you good times @ the track, but it will make the car a lot more fun to drive. In most cases people are turboing the cars for the power. The Greddy kit just wont give you that w/o running a lot of boost.
-
This is what i am thinking for my setup since Greddy would be expensive.
304 Stainless Header
Turbonetics T3/T4 T04E 5 bolt .50 .63 turbo
24"x12"x76mm Front Mount Inter Cooler
38mm Tial Wastegate
3" Downpipe
Greddy Type RS BOV
Walbro 255lph Pump
DSM 450cc Injectors
SX Fuel Preasure regulator
SLS MBC
SLS IC Piping and intake
AFCTufte let me know what you think of the setup. im thinking total will be about $1500 so far with what ive priced everything out at.
-
Harwood, are you using SSAutoChrome parts / XS Turbo?
Greddy Type RS - $175
Tial Wastegate - $215
Walbro Pump - $95
FPR - $130
DSM Injectors - $50
Boost Controller - $45
S-AFC - $300
Downpipe - $200
Garrett Turbo: $600
Stainless Header: 300-750
Intercooler Piping - $250
Intake - $100
FMIC: 350Your looking at around $2500+, plus your going to need a new clutch, don't forget the oil lines, and theres prob more I'm forgetting... Idk how you came up with $1500
-
harwood39 wrote:
This is what i am thinking for my setup since Greddy would be expensive.304 Stainless Header
Turbonetics T3/T4 T04E 5 bolt .50 .63 turbo
24"x12"x76mm Front Mount Inter Cooler
38mm Tial Wastegate
3" Downpipe
Greddy Type RS BOV
Walbro 255lph Pump
DSM 450cc Injectors
SX Fuel Preasure regulator
SLS MBC
SLS IC Piping and intake
AFCTufte let me know what you think of the setup. im thinking total will be about $1500 so far with what ive priced everything out at.
Unless your using junk Ebay parts not a prayer for $1500. That FMIC size is way overkill as well. The description of the turbo you describe says nothing except compressor/turbine housing sizes.
Building a custom kit is gonna run you around the same price as a Greddy if not a bit more but its gonna make a lot more power.
-
plus the price of install.......harwood your way over ur head on this one because....we all know you wont turbo your civic anyways because you change your mind every day and you dont even have the money......first your gonna make it a show car with a body kit....now ur making it a drag car.....then its a AUTOX/ daily driver.....soon its gonna be a go-cart.
-
mwc1 wrote:
plus the price of install.......harwood your way over ur head on this one because....we all know you wont turbo your civic anyways because you change your mind every day and you dont even have the money......first your gonna make it a show car with a body kit....now ur making it a drag car.....then its a AUTOX/ daily driver.....soon its gonna be a go-cart.ask any ricer, any real ricer...its not whats done to your car its about your plans
-
I know i will need a new clutch. Ok, i need some power estimations. how much power for the Greddy Kit? how much power for the SLS Kit?
After Pricing shit out all the way SLS's kit is a much better idea than just peicing one together.
And my car is still going to get a body kit on it after i turbo it.
-
304 Stainless Header
Turbonetics T3/T4 T04E 5 bolt .50 .63 turbo(same turbo used in the Drag Kit)
24"x12"x76mm Front Mount Inter Cooler
38mm Tial Wastegate
3" Downpipe
Some Cheap BOV
All Lines, Gaskets, Fittings, Ect.
------------------------------------------------------$850
Greddy Type RS BOV----$175
Walbro 255lph Pump----$95
DSM 450cc Injectors----$50
SX Fuel Preasure regulator----$130
SLS MBC----$45
SLS IC Piping and intake----$350
AFC(used)----$150-175And of course install and a clutch. No this isnt SSAutoChrome stuff. But i take it you guys have experience with them?
Anyways, I added it all up again and its about $1850-1900
Oh ya, and i take it an Intercooler is a must, at least thats how you guys make it sound. I am wondering because i found another kit that is basically the same setup, but it has all the piping but no IC, it just runs a pipe where the IC mounts.
-
LankorDie wrote:
I know Sean said it already but you can get some **great **deals off of Honda-Tech.Let the low balling start.
I forgot about H-T, i found a complete kit on there for $1400, basically everything except Fuel management, and IC. all the piping and every thing.
-
Idk what kinda manifold, wastegate, FMIC, downpipe and turbo your gonna get for $850.
My kit put down 241whp and 202 trq on 9-10 psi. We never got to tune the car as the wideband was down. Based off how choppy the graph was it was pretty damn rich.
Before i had the AFC and 450's in it and was just running the lame ass FMU it ran 12.5@109. FMU was all i had laying around that day so we used it took it to the track and ran it as is. Should easily run low 12's.
Nick
SLS
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login