new turbo and extras for the cummins
-
well the hy35 just wasn't cutting anymore. decided to go with a holset he351ve. using Fleece Performances vgt controller to control the veins. also putting on a 4" downpipe, an ATS 3-piece manifold and magnaflow 30" muffler.
veins closed
veins open
had to use and adaptor to make it fit on a t3 flange
this is what you get when you leave zac and me alone with a bandsaw and a welder.
also got rid of the silencer ring
-
so whens the p-pump swap gonna start? Iv been thinking about a fleece setup also lately.
-
beachbum_jon;319741 wrote:
so whens the p-pump swap gonna start? Iv been thinking about a fleece setup also lately.no p-pump for this one..... sovp44 are good to 700+ hp.
-
This post is deleted!
-
-
funky_monkey58;319809 wrote:
When is it going to be done?just need to finish up the exhaust and get fleece's controller to work right
-
got everything finished up.
just used a 4" alum 90 on the intake
mounted the Fleece Controller under the dash
mounted the eb switch and realtime boost control on the dash trim
also have a 64/62/vgt that should be showing up any day now
-
look what showed up in the mail today. 64/62
-
so what is that turbo capable of? I'm not familiar with diesel turbo sizing. also it looks like it is Extended tip? Is that a holset wheel, if so have they always had ett wheels or is this new?
-
DrifterExtreme;320446 wrote:
so what is that turbo capable of? I'm not familiar with diesel turbo sizing. also it looks like it is Extended tip? Is that a holset wheel, if so have they always had ett wheels or is this new?700hp on a 64mm is attainable with reasonable egt's. but that would be done on a 64/71/14. not sure what this will be capable of since its the only one made. im testing it with the stand alone vgt controller for a shop in WA. the compressor wheel is a borg warner wheel. they took a stock he351ve which is a 60/60/vgt and had the housings machined for the bigger wheels which are 64/62. not usre if you are familiar with how diesels label turbos but they use the compressor inducer and the exhaust exducer and then the housing size in cm.
-
here is a vid, engine held at 1500rpm
-
-
They do make larger vgt turbos, like off of the ISX. Although I am not sure if you can control them with the fleece controller or not, I dont see why it wouldnt work.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login