My project
-
I suppose i should do an update. Picked up a used borg warner st80 turbo that has been checked over. Ordered piston's, rod's, cam, balancer, performance lifter's and valve spring's and exhaust valve's for my 6.0 build.
-
howard's roller cam 232 intake/ 236 exhaust @ .050 .625 lift with the factory rocker ratio
-
i hope so. have to wait to see what other part's i'll need after the machine shop is done
-
finally got the block back from the machine shop. got the crankshaft back in. made an intake valley plate. going to start the rest of the assembly this weekend.
-
i thought i'd give everyone a quick update. motor is put together and run's. i have put about 80 - 100 miles on it since friday night and done some tuning. also saw 7 - 8lbs of boost already and no hicup's or farts so far.
-
So far this year i have ran a 10.15 @ 138 on 15lbs of boost. Had to upgrade my fuel pump and now looking at a convertor upgrade due to 19% slippage
-
Figured out my problem. Found out the exhaust housing on the st80 was to small and was choking it's self. So we made an adaptor to go from a t-4 to a t-6 and used my buddies s475 and his 28 inch slick's finally got in to the 9's. Here is a video that he got
-
Quick update got the powerglide built and ordered new intake and planning how to get a t-6 turbo under the hood
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login